Accumulator shaker, order no 40894
Battery vibrator, art. no. 40894
Electric battery vibrator for walls and floors to remove air pockets and cavities.
With the battery-powered vibrator, you can embed your tiles evenly in the adhesive bed and thus avoid cavities and air pockets in the adhesive. The high-frequency vibrations ensure effective work with low mechanical stress. The long-life rechargeable battery ensures that you can work without any annoying cable.
You get a faster and more even result that is far more satisfying than using a tapping board or rubber hammers.
Scope of delivery:
- Battery vibrator
- 2 vibrating plates
- rechargeable battery
- battery charger
- Carrying bag
These are the advantages of the battery vibrators:
- Selectable vibrating plates:
With quick flicks of the wrist, you can adjust the size of the vibrating surfaces as follows - either for smaller tiles and areas with a 15 x 15 cm vibrating surface or for large-sized corners and tiles with a 21 x 41 cm vibrating surface.
- Long-lasting battery operation:
With one battery charge, which is sufficient for approx. 150 m², long work is possible without frequent charging. The charger needs about 3 hours for a full charge. The 15V rechargeable battery enables smooth work processes without annoying cables and has a service life that is sufficient for approx. 100,000 m².
- Practical working:
The vibrator, which is equipped with 3 handles, enables both one-handed and two-handed working, thus reducing the one-sided strain that may occur. The underside made of special plastic greatly reduces abrasion and damage.
- Carrying bag:
Save yourself full hands - quickly and conveniently packed into the carrying bag and the battery shaker is easily carried to another location.
Technical data:
- Dimensions of small surface: 15 x 15 cm
- Dimensions of large surface: 21 x 41 cm
- Battery: 15 V
- Weight with small vibrating plate: 3.1 kg
- Weight with large vibratory plate: 5.3 kg
Note: Please note that the "On/Off/Charge" switch must be in the "CHARGE" position when charging.
Battery vibrator, art. no. 40894
Electric battery vibrator for walls and floors to remove air pockets and cavities.
With the battery-powered vibrator, you can embed your tiles evenly in the adhesive bed and thus avoid cavities and air pockets in the adhesive. The high-frequency vibrations ensure effective work with low mechanical stress. The long-life rechargeable battery ensures that you can work without any annoying cable.
You get a faster and more even result that is far more satisfying than using a tapping board or rubber hammers.
Scope of delivery:
- Battery vibrator
- 2 vibrating plates
- rechargeable battery
- battery charger
- Carrying bag
These are the advantages of the battery vibrators:
- Selectable vibrating plates:
With quick flicks of the wrist, you can adjust the size of the vibrating surfaces as follows - either for smaller tiles and areas with a 15 x 15 cm vibrating surface or for large-sized corners and tiles with a 21 x 41 cm vibrating surface.
- Long-lasting battery operation:
With one battery charge, which is sufficient for approx. 150 m², long work is possible without frequent charging. The charger needs about 3 hours for a full charge. The 15V rechargeable battery enables smooth work processes without annoying cables and has a service life that is sufficient for approx. 100,000 m².
- Practical working:
The vibrator, which is equipped with 3 handles, enables both one-handed and two-handed working, thus reducing the one-sided strain that may occur. The underside made of special plastic greatly reduces abrasion and damage.
- Carrying bag:
Save yourself full hands - quickly and conveniently packed into the carrying bag and the battery shaker is easily carried to another location.
Technical data:
- Dimensions of small surface: 15 x 15 cm
- Dimensions of large surface: 21 x 41 cm
- Battery: 15 V
- Weight with small vibrating plate: 3.1 kg
- Weight with large vibratory plate: 5.3 kg
Note: Please note that the "On/Off/Charge" switch must be in the "CHARGE" position when charging.