Kronos vacuum lifter Part No. 40759
Kronos vacuum lifter Item No. 40759
The vacuum lifter is suitable for garden and landscaping companies, natural stone companies and tilers. It is suitable for smooth and rough surfaces. It is also suitable for almost all materials, such as natural stone or concrete slabs. These can be lifted, transported and laid without any problems. As soon as you put the lifter on, it sucks itself to the surface.
The vacuum lifter consists of a stable aluminum housing, in which all components are accommodated. The vacuum pump creates a vacuum, the vacuum chamber is sealed by an elastic rubber. Thanks to the self-adhesive rubber, the seal can be changed easily and without complications.
Especially due to the two beams, the lifter is suitable for two-man operation. The beams are adjustable in height from 500 mm to 700 mm and in width from 850 mm to 1,250 mm. As standard, the device is equipped with water cutter and pressure gauge.
The lifter releases the plate only when you open the valve on the carrying handle.
The vacuum lifter is battery operated and provides high energy through the lithium-ion batteries. The continuous operation is about 3 hours, the charging time with the charger is about 2 hours.
With a few simple steps, you can convert the lifter for transportation.
The scope of delivery is:
- One vacuum lifter incl. suction plate
- Two exchangeable batteries
- One charger
- One gasket
- One vacuum filter
All advantages at a glance:
- Safe laying of tiles and slabs
- Easy to transport in just a few steps
- For two-man operation
- Sturdy aluminum housing
- Adjustable in height and width
- Perfect for landscapers, natural stone companies and tilers
All technical data:
Beam Height: 500 - 700 mm
Width 850 - 1250 mm
Continuous operation of the battery max. 3 hours
Maximum load capacity 150 kg 8depends on surface)
Charger 220V - 50 Hz
Operating temperature 0° C - 60 °C
Charging time 2 hours
Weight 19,0 kg
Kronos vacuum lifter Item No. 40759
The vacuum lifter is suitable for garden and landscaping companies, natural stone companies and tilers. It is suitable for smooth and rough surfaces. It is also suitable for almost all materials, such as natural stone or concrete slabs. These can be lifted, transported and laid without any problems. As soon as you put the lifter on, it sucks itself to the surface.
The vacuum lifter consists of a stable aluminum housing, in which all components are accommodated. The vacuum pump creates a vacuum, the vacuum chamber is sealed by an elastic rubber. Thanks to the self-adhesive rubber, the seal can be changed easily and without complications.
Especially due to the two beams, the lifter is suitable for two-man operation. The beams are adjustable in height from 500 mm to 700 mm and in width from 850 mm to 1,250 mm. As standard, the device is equipped with water cutter and pressure gauge.
The lifter releases the plate only when you open the valve on the carrying handle.
The vacuum lifter is battery operated and provides high energy through the lithium-ion batteries. The continuous operation is about 3 hours, the charging time with the charger is about 2 hours.
With a few simple steps, you can convert the lifter for transportation.
The scope of delivery is:
- One vacuum lifter incl. suction plate
- Two exchangeable batteries
- One charger
- One gasket
- One vacuum filter
All advantages at a glance:
- Safe laying of tiles and slabs
- Easy to transport in just a few steps
- For two-man operation
- Sturdy aluminum housing
- Adjustable in height and width
- Perfect for landscapers, natural stone companies and tilers
All technical data:
Beam Height: 500 - 700 mm
Width 850 - 1250 mm
Continuous operation of the battery max. 3 hours
Maximum load capacity 150 kg 8depends on surface)
Charger 220V - 50 Hz
Operating temperature 0° C - 60 °C
Charging time 2 hours
Weight 19,0 kg
