Marble putty transparent 150 ml, order no 11200
Marble putty transparent, item number 11200
Article unfortunately no longer available! We recommend our marble putties
Polyester-based filler for bonding and cementing natural and artificial stone indoors. Liquid and polishable marble putty with fast curing!
Scope of delivery:
Marble putty 1000 transparent, 150 ml
hardener paste, 8 g
Field of application of the marble putty transparent:
For bonding artificial and natural stone indoors.
Reinforcing natural stone slabs with glass fiber products (laminating)
Production of stone substitute masses with stone flours and sand
The filler has a medium viscosity consistency
Instructions for use of the marble putty transparent:
Clean the substrate, dry it completely and roughen it.
Coloring with color pastes or color concentrates is possible up to a maximum of 5%.
To 100 g of marble putty, add 1-4 g of hardener paste (corresponds to approx. 4-5 cm from the screw tube)
Mix both components completely with each other. The mixture remains workable for up to 15 minutes (at 20°C)
Allow to cure for 60 minutes, after which the product can be further processed (grinding, drilling, milling); the following applies: heat accelerates, cold delays the curing reaction
Special instructions for Marble Putty 1000 transparent:
Excessive addition of hardness quantity reduces adhesion and can worsen surface drying
Excessive addition of hardener quantity and low temperatures (below 5°C) considerably delay the curing reaction
Make sure the adhesive layer is as thin as possible (< 1 mm) to counteract reaction-related shrinkage and noticeable temperature development during curing
Bonds that are frequently exposed to moisture and possibly frost are not permanently resistant
Adhesion and resistance to fresh, alkaline building materials such as concrete or cast stone is only moderate
Cured marmor putty can no longer be removed with solvents (only mechanically or by high temperatures)
Marble putty transparent, item number 11200
Article unfortunately no longer available! We recommend our marble putties
Polyester-based filler for bonding and cementing natural and artificial stone indoors. Liquid and polishable marble putty with fast curing!
Scope of delivery:
Marble putty 1000 transparent, 150 ml
hardener paste, 8 g
Field of application of the marble putty transparent:
For bonding artificial and natural stone indoors.
Reinforcing natural stone slabs with glass fiber products (laminating)
Production of stone substitute masses with stone flours and sand
The filler has a medium viscosity consistency
Instructions for use of the marble putty transparent:
Clean the substrate, dry it completely and roughen it.
Coloring with color pastes or color concentrates is possible up to a maximum of 5%.
To 100 g of marble putty, add 1-4 g of hardener paste (corresponds to approx. 4-5 cm from the screw tube)
Mix both components completely with each other. The mixture remains workable for up to 15 minutes (at 20°C)
Allow to cure for 60 minutes, after which the product can be further processed (grinding, drilling, milling); the following applies: heat accelerates, cold delays the curing reaction
Special instructions for Marble Putty 1000 transparent:
Excessive addition of hardness quantity reduces adhesion and can worsen surface drying
Excessive addition of hardener quantity and low temperatures (below 5°C) considerably delay the curing reaction
Make sure the adhesive layer is as thin as possible (< 1 mm) to counteract reaction-related shrinkage and noticeable temperature development during curing
Bonds that are frequently exposed to moisture and possibly frost are not permanently resistant
Adhesion and resistance to fresh, alkaline building materials such as concrete or cast stone is only moderate
Cured marmor putty can no longer be removed with solvents (only mechanically or by high temperatures)