Special vacuum cleaner class M, 35 l, 1200W, item no. 40661
Special vacuum cleaner class M, 1200 W, 35 l, item no. 40661
Patented filter cleaning
The heart of the CraftiX is the new patented HEPA 13 cartridge filter. Composed of two independent filter chambers, which are cleaned one after the other. This has the advantage that the suction flow and the suction power thereby remain the same and that even during cleaning at a constantly high level and guarantees permanent suction.
The new way of cleaning the filter is by air back flushing and the patented cartridge filter ensures that the pores of the filter are cleaned without leaving any residues. This eliminates the need for time-consuming manual cleaning and maintenance of the filter, thus saving you time and money. In addition, the cleaning of the filter takes place every 45 sec. and that also above average quietly.
Technical data
Voltage | 220-240 V / 50-60 Hz |
Power | 1200 W |
max. negative pressure | 250 hPa / mbar |
Volume flow | 74 liters / sec. |
Container material | Plastic |
Container volume | 35 liters (brutto) |
Power cable | 10 m |
Suction hose Ø 35 mm | 5 m |
Suction tube | Ø 38 mm |
Weight | 16 kg |
Dimension (L x W x H) | 54 x 39 x 63,5 cm |
Dust class | M |
Max. Transmittance | < 0,1 % |
Suitable for | Dusts with AGW** values ≥ 0.1mg/m³ Wood dusts up to 1200 W/50 I |
Dust types | Wood dusts (beech, oak), paint dust particles, ceramic dusts, dusts from plastics |
Scope of delivery:
- Stainless steel suction pipes, 2 x 0.5 m
- Dry floor nozzle 450 mm
- crevice nozzle
- Round brush
- HEPA 13 cartridge filter
- Power tool adapter Ø 35 mm
- Power tool adapter Ø 21,25,32 mm
- Fleece filter bag
- Disposal bag
- Warning LED
- Suction hose 5m antistatic & oil resistant
- Suction hose 3m antistatic & oil resistant
Special vacuum cleaner class M, 1200 W, 35 l, item no. 40661
Patented filter cleaning
The heart of the CraftiX is the new patented HEPA 13 cartridge filter. Composed of two independent filter chambers, which are cleaned one after the other. This has the advantage that the suction flow and the suction power thereby remain the same and that even during cleaning at a constantly high level and guarantees permanent suction.
The new way of cleaning the filter is by air back flushing and the patented cartridge filter ensures that the pores of the filter are cleaned without leaving any residues. This eliminates the need for time-consuming manual cleaning and maintenance of the filter, thus saving you time and money. In addition, the cleaning of the filter takes place every 45 sec. and that also above average quietly.
Technical data
Voltage | 220-240 V / 50-60 Hz |
Power | 1200 W |
max. negative pressure | 250 hPa / mbar |
Volume flow | 74 liters / sec. |
Container material | Plastic |
Container volume | 35 liters (brutto) |
Power cable | 10 m |
Suction hose Ø 35 mm | 5 m |
Suction tube | Ø 38 mm |
Weight | 16 kg |
Dimension (L x W x H) | 54 x 39 x 63,5 cm |
Dust class | M |
Max. Transmittance | < 0,1 % |
Suitable for | Dusts with AGW** values ≥ 0.1mg/m³ Wood dusts up to 1200 W/50 I |
Dust types | Wood dusts (beech, oak), paint dust particles, ceramic dusts, dusts from plastics |
Scope of delivery:
- Stainless steel suction pipes, 2 x 0.5 m
- Dry floor nozzle 450 mm
- crevice nozzle
- Round brush
- HEPA 13 cartridge filter
- Power tool adapter Ø 35 mm
- Power tool adapter Ø 21,25,32 mm
- Fleece filter bag
- Disposal bag
- Warning LED
- Suction hose 5m antistatic & oil resistant
- Suction hose 3m antistatic & oil resistant