Washing system for tiles no. 12640

This article is no longer available! You can find a suitable alternative product here

The washing system makes it easier to clean tiles and saves a lot of time.

NEW! The washing system for a super easy squeezing out of sponge boards during the final cleaning of freshly laid tiled floors.

Washing system - the novelty for the tiler. Squeezing sponge boards has never been so quick and easy.

The new wash set works differently than all previous tile wash sets you have known so far. The simple but effective squeezing device is easy on your wrists and ensures perfectly squeezed sponge boards.

Scope of delivery washing system:

• Bucket with carrying handle (16 litres)
• New push-out device for the sponge board
• Grating for the bucket (bottom sieve)
• 4 track rollers

Advantages:

Thanks to a new type of push-out device, sponge boards are cleaned effectively and perfectly with just one movement. The squeezing out works by pressing down a bracket on the sponge board, which is then placed on a stable grid. The dirty water is powerfully and almost completely pressed out of the sponge board and led into the water bucket. Clean, simple and fast. The sponge board is reabsorbable and guarantees best washing results.

• Ergonomic pressing of the sponge board - the wrists are protected and relieved
• Sponge boards are pressed out evenly and cleanly and are reabsorbent of water and dirt
• The service life of the sponge boards is significantly increased, less wear of the sponge layer
• Suitable for all conventional sponge boards up to 28 x 14 cm (gridded and ungridded)

The easy application of the ejector:

1. Wash the tiles as usual with the damp sponge board until the sponge loses its cleaning power
2. First press the sponge board 1 - 2 times on the bottom sieve in the bucket to remove most of the dirt particles from the sponge
3. Then place the sponge board on the grid of the pusher and press the lever down on the sponge board
4. Press once to squeeze the dirty water out of the sponge board
5. The sponge layer of your sponge board is perfectly expressed and reabsorbable

Thanks to the included castors, the washing system can be easily pushed anywhere. You do not have to burden your back additionally by carrying the bucket around.

All components of the washing system are made of high-quality and durable plastic.

For optimal cleaning results, we recommend our hydro sponge boards (available in grid or ungrid).

>> Sponge boards Hydro KARL DAHM

Do you have questions about the washing system? Please call us at +49 8667 878-120
or send us an e-mail: info@dahm-werkzeuge.de

This article is no longer available! You can find a suitable alternative product here

The washing system makes it easier to clean tiles and saves a lot of time.

NEW! The washing system for a super easy squeezing out of sponge boards during the final cleaning of freshly laid tiled floors.

Washing system - the novelty for the tiler. Squeezing sponge boards has never been so quick and easy.

The new wash set works differently than all previous tile wash sets you have known so far. The simple but effective squeezing device is easy on your wrists and ensures perfectly squeezed sponge boards.

Scope of delivery washing system:

• Bucket with carrying handle (16 litres)
• New push-out device for the sponge board
• Grating for the bucket (bottom sieve)
• 4 track rollers

Advantages:

Thanks to a new type of push-out device, sponge boards are cleaned effectively and perfectly with just one movement. The squeezing out works by pressing down a bracket on the sponge board, which is then placed on a stable grid. The dirty water is powerfully and almost completely pressed out of the sponge board and led into the water bucket. Clean, simple and fast. The sponge board is reabsorbable and guarantees best washing results.

• Ergonomic pressing of the sponge board - the wrists are protected and relieved
• Sponge boards are pressed out evenly and cleanly and are reabsorbent of water and dirt
• The service life of the sponge boards is significantly increased, less wear of the sponge layer
• Suitable for all conventional sponge boards up to 28 x 14 cm (gridded and ungridded)

The easy application of the ejector:

1. Wash the tiles as usual with the damp sponge board until the sponge loses its cleaning power
2. First press the sponge board 1 - 2 times on the bottom sieve in the bucket to remove most of the dirt particles from the sponge
3. Then place the sponge board on the grid of the pusher and press the lever down on the sponge board
4. Press once to squeeze the dirty water out of the sponge board
5. The sponge layer of your sponge board is perfectly expressed and reabsorbable

Thanks to the included castors, the washing system can be easily pushed anywhere. You do not have to burden your back additionally by carrying the bucket around.

All components of the washing system are made of high-quality and durable plastic.

For optimal cleaning results, we recommend our hydro sponge boards (available in grid or ungrid).

>> Sponge boards Hydro KARL DAHM

Do you have questions about the washing system? Please call us at +49 8667 878-120
or send us an e-mail: info@dahm-werkzeuge.de

• Print this page