Mixing paddle, Levelling compounds Ø 90 mm, Order No. 11873
Stirrer for leveling compounds Ø 90 mm, item no. 11873
The stirrer is ideal for all liquid and runny materials, such as:
- leveling compounds
- thin-bed mortar
- slurries
- adhesives
- Bitumen-free sealants
It is characterized by its two turbine blades mounted one above the other. They ensure thorough material flow and prevent lump formation. The material is pressed down from above by the counterclockwise mixing action and flows back up the sides. Without splashing, possible lumps are broken up by the high force of the drive and the operating end. The stirrer is therefore ideally suited for thin-bodied materials.
Technical data:
Mixing quantity: 5 - 15 l
Ø 90 mm
connection: Drilling machine
The mixing effect of the stirrer illustrated by mixing yellow paint:
Not the right one? We also offer other stirrers for leveling compounds:
Item no. 10873 with M14 thread
Art. no. 11897 for self-leveling compounds, with M14 thread
Art.-No. 11870 for 30 - 50 l mixing quantity
Art.-No. 11898 for liquid and creamy substances
Art. no. 11884 for sticky and plastic materials, with Hexafix® receptacle
Art. no. 11888 for self-leveling compounds, with Hexafix® receptacle
Art. no. 11869 for 30 - 50 l mixing quantity, with Hexafix® receptacle
Please also inform yourself about our other stirrers:
Spiral stirrer for tough materials with high viscosity, such as tile adhesive, filler, screed, concrete, ready-mix mortar, cement plaster, jointing material, etc.
Circular stirrer, plastic-coated, for liquid materials with low viscosity, such as paints, varnishes, cement slurries, bitumen, etc.
Also convince yourself of our practical accessories:
Agitator stand: your agitator always at hand and at the same time tidied up to save space; can be dismantled for transport, item no. 40094.
Dust extraction for bucket, for dust-free work on the construction site, item no. 12001
If you have any questions about our stirrers, we will be happy to advise you: ☎ +49 8667 878-0
Stirrer for leveling compounds Ø 90 mm, item no. 11873
The stirrer is ideal for all liquid and runny materials, such as:
- leveling compounds
- thin-bed mortar
- slurries
- adhesives
- Bitumen-free sealants
It is characterized by its two turbine blades mounted one above the other. They ensure thorough material flow and prevent lump formation. The material is pressed down from above by the counterclockwise mixing action and flows back up the sides. Without splashing, possible lumps are broken up by the high force of the drive and the operating end. The stirrer is therefore ideally suited for thin-bodied materials.
Technical data:
Mixing quantity: 5 - 15 l
Ø 90 mm
connection: Drilling machine
The mixing effect of the stirrer illustrated by mixing yellow paint:
Not the right one? We also offer other stirrers for leveling compounds:
Item no. 10873 with M14 thread
Art. no. 11897 for self-leveling compounds, with M14 thread
Art.-No. 11870 for 30 - 50 l mixing quantity
Art.-No. 11898 for liquid and creamy substances
Art. no. 11884 for sticky and plastic materials, with Hexafix® receptacle
Art. no. 11888 for self-leveling compounds, with Hexafix® receptacle
Art. no. 11869 for 30 - 50 l mixing quantity, with Hexafix® receptacle
Please also inform yourself about our other stirrers:
Spiral stirrer for tough materials with high viscosity, such as tile adhesive, filler, screed, concrete, ready-mix mortar, cement plaster, jointing material, etc.
Circular stirrer, plastic-coated, for liquid materials with low viscosity, such as paints, varnishes, cement slurries, bitumen, etc.
Also convince yourself of our practical accessories:
Agitator stand: your agitator always at hand and at the same time tidied up to save space; can be dismantled for transport, item no. 40094.
Dust extraction for bucket, for dust-free work on the construction site, item no. 12001
If you have any questions about our stirrers, we will be happy to advise you: ☎ +49 8667 878-0
