Shower tray "Classic" matt black, retrofittable Art. 12706
Shower shelf "Classic" matt black, retrofittable Art. 12706
This modern, matt black shower tray ensures that you always have your hygiene products to hand when showering. The black, brushed V2A stainless steel complements the look of your bathroom and keeps your surroundings safe, as the shower tray has no sharp edges. The triangular shape saves space and is suitable for any shower. The multifunctional shower tray from Karl Dahm enriches every bathroom with its functional minimalism and immediately gives your bathroom a modern touch with its aesthetic design. The punched-out grooves allow your shower water to run off easily and also make cleaning the shower easier, as the shelf does not calcify so quickly.
While other shower shelves usually require time-consuming and complicated installation and are usually unsightly, sharp-edged and not at all practical afterwards, the installation of our Karl Dahm shower shelves is extremely simple and the result is guaranteed to be more than satisfactory.
Simply follow our instructions:
- Start by measuring the side lengths of the shower shelf and transfer them with a pencil to the desired height in your shower.
- Use a cutter knife or a joint remover to carefully cut open the joints. Be careful not to damage the seal!
- Apply joint adhesive between the cut joints and insert the shower tray.
- Now spray the joint with silicone. Make sure to treat both the top and bottom sides. Then leave the entire construction to dry for at least 12 hours.
The shower trays are ideal for retrofitting and are particularly suitable for narrow joints from 1 mm. Thanks to their careful processing, there is no risk of injury from sharp edges.
The respective powder coatings in elegant colour variations, stainless steel, beige and black, give the shower tray an attractive appearance.
No drilling or gluing is required for installation, which prevents damage to the seal and enables a higher load-bearing capacity compared to conventional shower trays. In addition, the shelf can be easily removed and replaced at any time. Measuring 240 x 240 x 340 mm, the shower tray has a modern design and offers an elegant, black look for your bathroom.
Your benefits at a glance:
- ideal for retrofitting, especially for narrow joints from 1 mm
- No risk of injury due to sharp-edged corners
- Powder coating in various colours (available in stainless steel, beige and black)
- No drilling ➔ No damage to the seal or tiles
- No gluing ➔ More load-bearing capacity than with adhesive shower trays
- Tray can be replaced at any time if required
- Modern design ➔ Elegant, black look for your shower
- Dimensions: 240 x 240 x 340 mm
We offer the following variants:
- Shower shelf multifunctional "Classic", stainless steel Art. 12700
- Shower shelf multifunctional "Classic" beige Art. 12701
- Shower shelf multifunctional "Classic" black Art. 12702
- Shower shelf multifunctional "Vintage" stainless steel Art.12703
- Shower shelf multifunctional "Vintage" beige Art.12704
- Shower shelf multifunctional "Vintage" black Art. 12705
Shower shelf "Classic" matt black, retrofittable Art. 12706
This modern, matt black shower tray ensures that you always have your hygiene products to hand when showering. The black, brushed V2A stainless steel complements the look of your bathroom and keeps your surroundings safe, as the shower tray has no sharp edges. The triangular shape saves space and is suitable for any shower. The multifunctional shower tray from Karl Dahm enriches every bathroom with its functional minimalism and immediately gives your bathroom a modern touch with its aesthetic design. The punched-out grooves allow your shower water to run off easily and also make cleaning the shower easier, as the shelf does not calcify so quickly.
While other shower shelves usually require time-consuming and complicated installation and are usually unsightly, sharp-edged and not at all practical afterwards, the installation of our Karl Dahm shower shelves is extremely simple and the result is guaranteed to be more than satisfactory.
Simply follow our instructions:
- Start by measuring the side lengths of the shower shelf and transfer them with a pencil to the desired height in your shower.
- Use a cutter knife or a joint remover to carefully cut open the joints. Be careful not to damage the seal!
- Apply joint adhesive between the cut joints and insert the shower tray.
- Now spray the joint with silicone. Make sure to treat both the top and bottom sides. Then leave the entire construction to dry for at least 12 hours.
The shower trays are ideal for retrofitting and are particularly suitable for narrow joints from 1 mm. Thanks to their careful processing, there is no risk of injury from sharp edges.
The respective powder coatings in elegant colour variations, stainless steel, beige and black, give the shower tray an attractive appearance.
No drilling or gluing is required for installation, which prevents damage to the seal and enables a higher load-bearing capacity compared to conventional shower trays. In addition, the shelf can be easily removed and replaced at any time. Measuring 240 x 240 x 340 mm, the shower tray has a modern design and offers an elegant, black look for your bathroom.
Your benefits at a glance:
- ideal for retrofitting, especially for narrow joints from 1 mm
- No risk of injury due to sharp-edged corners
- Powder coating in various colours (available in stainless steel, beige and black)
- No drilling ➔ No damage to the seal or tiles
- No gluing ➔ More load-bearing capacity than with adhesive shower trays
- Tray can be replaced at any time if required
- Modern design ➔ Elegant, black look for your shower
- Dimensions: 240 x 240 x 340 mm
We offer the following variants:
- Shower shelf multifunctional "Classic", stainless steel Art. 12700
- Shower shelf multifunctional "Classic" beige Art. 12701
- Shower shelf multifunctional "Classic" black Art. 12702
- Shower shelf multifunctional "Vintage" stainless steel Art.12703
- Shower shelf multifunctional "Vintage" beige Art.12704
- Shower shelf multifunctional "Vintage" black Art. 12705
Related Products
Customers who bought this product also bought these items:
