Cut protection tape flexible | grid structure | 5 cm x 10 m, no. 12005

Cut protection tape V4A stainless | 5 cm x 10 m | Art. 12005

Flexible cut protection strip made of V4A stainless steel.

Range of application:

• Protects composite seals and connection and movement joints from damage when cutting out and renewing silicone joints
• For indoor and outdoor
• Made of V4A stainless steel
• Resistant to acid and chlorinated water (can also be used in wet rooms)
• Suitable for all types of sealing
• For installation on walls and floors

Application:

Tip: Wear gloves when working with the cut protection tape to avoid injuries!

1. cut the required length of cut protection tape with scissors (you should always allow 4 cm more than required)
2. to prevent damage to the seal by the sharp band ends, fold it over
3. place the cut protection tape in the serrated adhesive bed and embed it in the adhesive using a trowel
4. lay the tiles as usual

The cut protection tape is also available in the dimensions 3 cm x 20 m!

Cut protection tape V4A stainless | 5 cm x 10 m | Art. 12005

Flexible cut protection strip made of V4A stainless steel.

Range of application:

• Protects composite seals and connection and movement joints from damage when cutting out and renewing silicone joints
• For indoor and outdoor
• Made of V4A stainless steel
• Resistant to acid and chlorinated water (can also be used in wet rooms)
• Suitable for all types of sealing
• For installation on walls and floors

Application:

Tip: Wear gloves when working with the cut protection tape to avoid injuries!

1. cut the required length of cut protection tape with scissors (you should always allow 4 cm more than required)
2. to prevent damage to the seal by the sharp band ends, fold it over
3. place the cut protection tape in the serrated adhesive bed and embed it in the adhesive using a trowel
4. lay the tiles as usual

The cut protection tape is also available in the dimensions 3 cm x 20 m!

• Print this page