Diamond dry drill bit gold M14 | Ø 40 mm | no. 50409

Diamond dry drill bit gold - diameter 40 mm

• Speed should be between 10,000 and 13,000 rpm.
• With M14 female thread for all common angle grinders
• Drill bit is used in dry condition - without water cooling!
• Long service life, excellent quality
• With paraffin wax core for better cooling

Application of the drill bit:

1. screw the drill bit onto the angle grinder's pick-up spindle
2. place the drill bit at an angle to the material, it should not lie flat against the material.
3. work into the material in circular movements.
   Drilling should be carried out in a smooth manner and without pressure.
4. Reduce the pressure if sparks form. Avoid overheating. Take cooling breaks for thick, hard materials.

Drill bits are available in Ø 6 to 120 mm

50394 Diamond drill bit GOLD Ø 6 mm

50395 Diamond drill bit GOLD Ø 8 mm

50396 Diamond drill bit GOLD Ø 10 mm

50397 Diamond drill bit GOLD Ø 12 mm

50398 Diamond drill bit GOLD Ø 14 mm

50399 Diamond drill bit GOLD Ø 18 mm

50400 Diamond drill bit GOLD Ø 20 mm

50406 Diamond drill bit GOLD Ø 25 mm

50407 Diamond drill bit GOLD Ø 32 mm

50401 Diamond drill bit GOLD Ø 35 mm

50402 Diamond drill bit GOLD Ø 38 mm

50409 Diamond drill bit GOLD Ø 40 mm

50403 Diamond drill bit GOLD Ø 43 mm

50411 Diamond drill bit GOLD Ø 45 mm

50404 Diamond drill bit GOLD Ø 50 mm

50412 Diamond drill bit GOLD Ø 55 mm

50240 Diamond drill bit GOLD Ø 60 mm

50241 Diamond drill bit GOLD Ø 65 mm

50405 Diamond drill bit GOLD Ø 68 mm

50413 Diamond drill bit GOLD Ø 75 mm

50414 Diamond drill bit GOLD Ø 82 mm

50242 Diamond drill bit GOLD Ø 100 mm

50415 Diamond drill bit GOLD Ø 110 mm

50416 Diamond drill bit GOLD Ø 120 mm

Diamond dry drill bit gold - diameter 40 mm

• Speed should be between 10,000 and 13,000 rpm.
• With M14 female thread for all common angle grinders
• Drill bit is used in dry condition - without water cooling!
• Long service life, excellent quality
• With paraffin wax core for better cooling

Application of the drill bit:

1. screw the drill bit onto the angle grinder's pick-up spindle
2. place the drill bit at an angle to the material, it should not lie flat against the material.
3. work into the material in circular movements.
   Drilling should be carried out in a smooth manner and without pressure.
4. Reduce the pressure if sparks form. Avoid overheating. Take cooling breaks for thick, hard materials.

Drill bits are available in Ø 6 to 120 mm

50394 Diamond drill bit GOLD Ø 6 mm

50395 Diamond drill bit GOLD Ø 8 mm

50396 Diamond drill bit GOLD Ø 10 mm

50397 Diamond drill bit GOLD Ø 12 mm

50398 Diamond drill bit GOLD Ø 14 mm

50399 Diamond drill bit GOLD Ø 18 mm

50400 Diamond drill bit GOLD Ø 20 mm

50406 Diamond drill bit GOLD Ø 25 mm

50407 Diamond drill bit GOLD Ø 32 mm

50401 Diamond drill bit GOLD Ø 35 mm

50402 Diamond drill bit GOLD Ø 38 mm

50409 Diamond drill bit GOLD Ø 40 mm

50403 Diamond drill bit GOLD Ø 43 mm

50411 Diamond drill bit GOLD Ø 45 mm

50404 Diamond drill bit GOLD Ø 50 mm

50412 Diamond drill bit GOLD Ø 55 mm

50240 Diamond drill bit GOLD Ø 60 mm

50241 Diamond drill bit GOLD Ø 65 mm

50405 Diamond drill bit GOLD Ø 68 mm

50413 Diamond drill bit GOLD Ø 75 mm

50414 Diamond drill bit GOLD Ø 82 mm

50242 Diamond drill bit GOLD Ø 100 mm

50415 Diamond drill bit GOLD Ø 110 mm

50416 Diamond drill bit GOLD Ø 120 mm

• Print this page