Diamond segment blade, 1.2 mm – extra thin for precise removal of hard joints
The diamond segment blade is the right choice when marble, epoxy resin, trass, cement or very hard joints need to be removed cleanly and in a controlled manner. Thanks to the extra-thin design with a cutting width of approx. 1.2 mm, the tool is particularly suitable for precise work on tiles, natural stone and adjacent covering surfaces.
The diamond segment blade is especially convincing wherever clean cutting guidance, good service life and controlled working are required. The segmented cutting edge makes it easier to work in corners and along edges without creating unnecessary overcuts. This makes the segment blade a professional accessory for renovation, joint replacement and demanding detail work in the tiling trade.
Advantages of the diamond segment blade
- For removing marble, epoxy resin, trass and cement joints
- Also suitable for very hard epoxy or cement joints
- Extra-thin design with approx. 1.2 mm cutting width
- Segmented shape for precise work in corners and along edges
- Reduces the risk of overcuts during detail work
- Excellent service life with frequent use
- Suitable for demanding renovation and repair work
- Suitable for machines with StarlockMAX mount
- Clean cutting guidance in narrow joint areas
- Ideal for tilers, renovators and professional users
Scope of delivery
- 1 x Diamond segment blade, 1.2 mm
Precise work with the diamond segment blade
When removing old joints, control and material protection are essential. Especially with adjacent tile or natural stone surfaces, the tool must not work too wide, so that edges and surfaces remain as undamaged as possible. The diamond segment blade with 1.2 mm cutting width and StarlockMAX mount supports exactly this precise working method.
Thanks to the segmented design, the tool can be guided precisely in joint areas. This shape is a clear advantage, especially at wall connections, internal corners, edge zones or narrow detail areas. The cutting edge works in a controlled manner in the joint material and enables clean removal without unnecessary rework.
The StarlockMAX mount ensures a stable connection between the tool and the suitable machine. It supports direct power transmission and is particularly suitable for demanding applications with high loads. As a result, the segment blade remains reliable in use even with hard joint materials.
Diamond segment blade for hard joint materials
With epoxy resin joints or highly compacted cement joints, simple tools quickly reach their limits. The segment blade is designed for these harder materials and offers a long service life with repeated use. This makes it particularly suitable for professional users who regularly remove or renovate joints.
Controlled working is also important with trass joints and marble coverings. The tool enables targeted removal of the joint material without unnecessarily stressing adjacent areas. When used on high-quality coverings, steady machine guidance is crucial to keep the cut edge clean.
The segment blade is particularly suitable for work where a thin cut and good accessibility are required, and it can be a useful solution in joint renovation when precise removal in hard-to-reach areas is necessary.
Application notes for clean results
Before use, it should be checked whether the machine is suitable for tools with StarlockMAX. Controlled guidance along the joint is just as important, so that the cut does not break out sideways or damage adjacent tile edges. For sensitive surfaces, careful positioning and working with steady feed are recommended.
For a longer service life, the tool should not be tilted or guided with excessive pressure. The diamond segment blade works best when the machine provides the cutting performance and the user guides the cut in a controlled manner. When working with old joint materials, suitable personal protective equipment should be worn, especially safety goggles, hearing protection and dust protection depending on the application.
Frequently asked questions
What is the diamond segment blade used for?
The diamond segment blade is used to remove marble, epoxy resin, trass and cement joints.
It is particularly suitable for hard joint materials where long service life and precise cutting guidance are required. Thanks to the narrow cutting width of approx. 1.2 mm, the tool can be guided in a controlled manner in narrow joint areas. It is a suitable solution for professional users, especially for renovation, repair work or the replacement of individual joints.
Which machines are suitable for the StarlockMAX mount?
The StarlockMAX mount is designed for machines that support this mounting system.
Before use, it should always be checked whether your own device is compatible with StarlockMAX tools. Only with the correct mount does the tool sit securely and ensure reliable power transmission. Especially with hard epoxy or cement joints, a stable connection between machine and tool is essential for clean working results.
Why is the segment blade suitable for corners and edges?
The segment blade is particularly suitable for work in corners, along edges and in border areas due to its segmented shape.
The shape enables targeted guidance in the joint material without creating unnecessary overcuts. This helps protect adjacent tile or natural stone surfaces more effectively. For precise detail work, steady machine guidance and even feed are also important.
In addition to the diamond segment blade, you will find further suitable tools for joint renovation, cutting and detail work in the Joint Cutters and Multimaster category. Professional users will find accessories there for precise work on tiles, natural stone and joint areas. This allows you to expand your equipment to suit the respective application and achieve clean results on the construction site.
Do you have any questions on this item?
