Folding caps basic set no. 12479 | Tile leveling system

Tiles Levelling system Folding pull hoods Basic set Art. 12479

Attention: For sensitive surfaces we recommend the washers with the article number 12489

Scope of delivery:

• 25 new hinged hoods for tile thickness 3-18 mm
• 250 basic threaded tabs for 2 mm joint width
• Delivery in carton

Advantages of the new folding hoods of the KARL DAHM Levelmac® levelling system:

• Faster application and levelling of the tiles thanks to innovative folding mechanism
• Fewer rotations required for levelling
• You save valuable time during installation
• Suitable for all cross, T-piece and base plates of the Levelmac levelling system by Karl Dahm

Application Tile levelling system with the folding pull hoods:

1. Lay the first tile and insert the basic threaded tabs under the tile in the adhesive
2. Place the next tile in the adhesive so that the threaded tabs are fixed in the joint between the tiles
3. Unfold the hinged pulling hoods, put the hood around the thread of the base flap and fold the hood shut. With only 1-2 turns the tile is now levelled
4. When the adhesive has completely cured, the hinged pull covers can be easily opened and removed. The hinged hoods are reusable. The threaded lug protrusions are broken off in the direction of the joint and disposed of

Do you have questions about our Levelmac levelling system? Call us, we will be happy to advise you!

Tel.: 08667 878-0

Tiles Levelling system Folding pull hoods Basic set Art. 12479

Attention: For sensitive surfaces we recommend the washers with the article number 12489

Scope of delivery:

• 25 new hinged hoods for tile thickness 3-18 mm
• 250 basic threaded tabs for 2 mm joint width
• Delivery in carton

Advantages of the new folding hoods of the KARL DAHM Levelmac® levelling system:

• Faster application and levelling of the tiles thanks to innovative folding mechanism
• Fewer rotations required for levelling
• You save valuable time during installation
• Suitable for all cross, T-piece and base plates of the Levelmac levelling system by Karl Dahm

Application Tile levelling system with the folding pull hoods:

1. Lay the first tile and insert the basic threaded tabs under the tile in the adhesive
2. Place the next tile in the adhesive so that the threaded tabs are fixed in the joint between the tiles
3. Unfold the hinged pulling hoods, put the hood around the thread of the base flap and fold the hood shut. With only 1-2 turns the tile is now levelled
4. When the adhesive has completely cured, the hinged pull covers can be easily opened and removed. The hinged hoods are reusable. The threaded lug protrusions are broken off in the direction of the joint and disposed of

Do you have questions about our Levelmac levelling system? Call us, we will be happy to advise you!

Tel.: 08667 878-0

• Print this page