Fugues colouring joints renew with fugenfärber Karl Dahm
Dinerting/renewing joints quickly and easily - the instructions:
Before grinting/renewing joints, be sure to test the product at a smaller location, as color deviations may occur. Then start cleaning. Remove the surfaces or joints from dirt and coatings. For this we recommend our joint brush (Art. No. 11922), which is used for joint cleaning. We also recommend the joint torpedo Art.-No. 16100.
Then take a brush and work the footlifter into the joint by moving forwards and backwards. Make it easier to work with our Fuminist Bottle Art.-No. 12399. The joints must be completely dry before applying the joint paint. As a rule, the action time is between 10 and 15 minutes. Our recommendation is 15 minutes. In the best case, test it on a test surface.
After drying time, the paint can be washed off the tile with water and a special cleaning sponge such as Art.-No.10226.
Finished! The new appearance of your joint and the easy care is preserved for a long time. The guide is connected to the joints and not to the tiles.
Colouring/renewing joints: in 12 different colours!Item No. 12406w White
Item No. 12408 Linen White
Item No. 12409 Light beige
Item No. 12423 Silver
Item No. 12424 Light grey
Item No. 12425 Grey
Item No. 12412 Ochre
Item No. 12429 Mocha
Art.-No. 12416 Cocoa
Item No. 12427 Anthracite
Item No. 12432 Dark Anthracite
Item No. 12428 Black
For post-treatment we recommend our joint impregnation spray (Art. No. 11323). It provides subsequent protection.
Before dinerting/renewing joints, our joint cleaning set (Art. 11938) is recommended. The following products are included in this set:
2 L storage box
50 ml joint cleaner
1x scratch-free eraser sponge (white)
1x Microfiber cloth
1x Cleaning sponge (blue)
1x special brush
Contact us if you have any questions about dyeing joints. We advise you!
Email: info@dahm-werkzeuge.de Tel.: +49 (0) 8667/ 878-0 WhatsApp: +49 (0 8667/ 878-0
Dinerting/renewing joints quickly and easily - the instructions:
Before grinting/renewing joints, be sure to test the product at a smaller location, as color deviations may occur. Then start cleaning. Remove the surfaces or joints from dirt and coatings. For this we recommend our joint brush (Art. No. 11922), which is used for joint cleaning. We also recommend the joint torpedo Art.-No. 16100.
Then take a brush and work the footlifter into the joint by moving forwards and backwards. Make it easier to work with our Fuminist Bottle Art.-No. 12399. The joints must be completely dry before applying the joint paint. As a rule, the action time is between 10 and 15 minutes. Our recommendation is 15 minutes. In the best case, test it on a test surface.
After drying time, the paint can be washed off the tile with water and a special cleaning sponge such as Art.-No.10226.
Finished! The new appearance of your joint and the easy care is preserved for a long time. The guide is connected to the joints and not to the tiles.
Colouring/renewing joints: in 12 different colours!Item No. 12406w White
Item No. 12408 Linen White
Item No. 12409 Light beige
Item No. 12423 Silver
Item No. 12424 Light grey
Item No. 12425 Grey
Item No. 12412 Ochre
Item No. 12429 Mocha
Art.-No. 12416 Cocoa
Item No. 12427 Anthracite
Item No. 12432 Dark Anthracite
Item No. 12428 Black
For post-treatment we recommend our joint impregnation spray (Art. No. 11323). It provides subsequent protection.
Before dinerting/renewing joints, our joint cleaning set (Art. 11938) is recommended. The following products are included in this set:
2 L storage box
50 ml joint cleaner
1x scratch-free eraser sponge (white)
1x Microfiber cloth
1x Cleaning sponge (blue)
1x special brush
Contact us if you have any questions about dyeing joints. We advise you!
Email: info@dahm-werkzeuge.de Tel.: +49 (0) 8667/ 878-0 WhatsApp: +49 (0 8667/ 878-0
Related Products
Customers who bought this product also bought these items:
