Karl Dahm Billy Click 20 pcs 12884 Installation aid in wet areas
Billy Click installation help from Karl Dahm Protect your seal in wet areas.
Protect the sealing sleeve during installation. Simply put the Billy Click over the construction plug before sealing the Maschette. After installing the brass extension, simply pull out the Billy Click. This guarantees perfect tightness.
The Billy Click installation aid from Karl Dahm is the ideal installation aid in wet areas. The installation aid is available in a packaging unit of 20 pieces.
Thanks to the Karl Dahm Billy Click, you protect your seals in wet areas. Likewise, the sealing sleeve is protected from damage during installation. Simply place the Billy Click over the construction plug before sealing the collar. After installing the brass extension, you can simply pull out the installation aid. This guarantees a perfect seal.
Additionally with overtooth measuring function. Measuring template 1.0 / 1.3 / 1.5 mm.
This is how you install the Karl Dahm Billy Click:
- Place BILLY-CLICK on the building plug.
- Push the BILLY-CLICK flat against the wall
- Put the sleeve over the BILLY-CLICK and tie it into the AIV
- Lay the tiles - Done!
This is how you remove the Karl Dahm Billy Click:
- Unscrew the construction plug
- Mount the matching extension
- Remove the BILLY-CLICK
- Done!
Billy Click installation help from Karl Dahm Protect your seal in wet areas.
Protect the sealing sleeve during installation. Simply put the Billy Click over the construction plug before sealing the Maschette. After installing the brass extension, simply pull out the Billy Click. This guarantees perfect tightness.
The Billy Click installation aid from Karl Dahm is the ideal installation aid in wet areas. The installation aid is available in a packaging unit of 20 pieces.
Thanks to the Karl Dahm Billy Click, you protect your seals in wet areas. Likewise, the sealing sleeve is protected from damage during installation. Simply place the Billy Click over the construction plug before sealing the collar. After installing the brass extension, you can simply pull out the installation aid. This guarantees a perfect seal.
Additionally with overtooth measuring function. Measuring template 1.0 / 1.3 / 1.5 mm.
This is how you install the Karl Dahm Billy Click:
- Place BILLY-CLICK on the building plug.
- Push the BILLY-CLICK flat against the wall
- Put the sleeve over the BILLY-CLICK and tie it into the AIV
- Lay the tiles - Done!
This is how you remove the Karl Dahm Billy Click:
- Unscrew the construction plug
- Mount the matching extension
- Remove the BILLY-CLICK
- Done!