Tileable Flush Plate Side Mini: flush-mounted instead of visible
The tileable flush plate Side Mini replaces the standard actuator plate of the cistern and is subsequently covered with the same material as the surrounding wall. Instead of a plastic plate sticking out from the tile backsplash, a continuous surface is created – the operation remains fully functional, but no longer visually appears. For bathrooms with large-format tiles, continuous joint patterns, or natural stone, this is the difference between a planned surface and a compromise.
Compatible with common pre-wall systems
The flush plate is designed for Geberit WC modules in the Sigma, Delta, and Omega series, as well as for modules from TeCe, Roca, Alca, and Pucci. It thus covers the vast majority of pre-wall elements installed in existing and new buildings. Before ordering, the existing module should nevertheless be checked, as different versions are in circulation within the series.
Scope of delivery: front plate, magnets, actuator rods, and template
The scope of delivery includes the front plate with four neodymium magnets, two actuator rods, and the 2in1 template for the cutout. The magnetic fastening holds the covered plate in position while allowing it to be removed for maintenance work on the cistern – a point that regularly becomes a problem with permanently glued solutions. The template defines the cut lines for the tile cutout so that the cut does not have to be marked out freehand.
PET-G material: dimensionally stable in wet areas
The tileable flush plate is made of PET-G. The material is dimensionally stable, impact-resistant, and resistant to moisture in the bathroom. Compared to metal versions, it also features a lower dead weight – relevant because the weight of the glued-on tile or natural stone slab acts on the magnetic mount.
Installation belongs in professional hands
Installation requires an experienced tiler with the right tools for cutting tiles. The cutout must be dimensionally accurate so that the covered plate lies flush with the surface and the surrounding joints continue seamlessly. Faulty cuts can hardly be corrected afterwards, as the surface is perceived as a whole and any deviation in the joint grid is immediately noticeable. Angle grinders with guide rails or similar systems suitable for making straight cuts in laid or loose tiles are ideal for cutting.
Technical data at a glance
- Article number: 16870
- Design: Side Mini - Royal Flush, tileable
- Material: PET-G
- Dimensions: 205 × 120 mm
- Fastening: 4 neodymium magnets
- Scope of delivery: front plate, 2 actuator rods, 2in1 template
- Compatible with: Geberit Sigma, Delta, and Omega, TeCe, Roca, Alca, Pucci
Which cistern modules is the flush plate suitable for?
The flush plate is designed for Geberit Sigma, Delta, and Omega, as well as for modules from TeCe, Roca, Alca, and Pucci.
Different versions exist within the series, which is why checking against the installed module before ordering is recommended. If in doubt, a look at the existing actuator plate and inspection opening will help.
What is included in the scope of delivery?
The front plate with four neodymium magnets, two actuator rods, and the 2in1 template.
The template is used for the cutout for the plate. Tiles, adhesive, and tools are not included and must be provided on-site.
Can the plate still be removed after tiling?
Fastening via four neodymium magnets allows the plate to be removed.
This is a requirement for future maintenance work on the cistern. With permanently glued designs, access to the inspection opening is only possible by destroying the surface.
Can the flush plate be installed by oneself?
Installation requires an experienced tiler with suitable tools for tile cutting.
The cutout must be dimensionally accurate so that the covered plate sits flush with the surface and the surrounding joint pattern continues seamlessly. Subsequent touch-ups are practically impossible at this point.
What material is the tileable flush plate made of?
The plate is made of PET-G.
The material is dimensionally stable and resistant to moisture in the bathroom. Its low dead weight benefits the magnetic mount, which additionally carries the weight of the glued-on covering.
Do you have any questions on this item?
