Restoration kit for silicone joints, art-no. 11595

The silicone joint restoration kit, Art. No. 11595, is a comprehensive professional equipment package for renewing silicone joints.

Old, damaged, discoloured or poorly finished silicone joints can be removed with the included tools and the joint area can be prepared for new sealant. The kit supports the complete working process with tools for cutting, scraping, cleaning, applying, shaping and finishing silicone.

Scope of supply in the silicone joint restoration kit for silicone joint repair

The silicone joint restoration kit contains a comprehensive selection of professional tools and accessories for removing, preparing, renewing and finishing silicone joints:

• 1 x three-piece joint spatula set, Art. No. 10554
• 1 x compact cartridge gun, Art. No. 10582
• 1 x assorted silicone profiling tools, Art. No. 10583
• 5 x 45-degree angled pieces, Art. No. 10584
• 5 x special nozzles, Art. No. 10586
• 1 x spray bottle, 1,000 ml, Art. No. 10587
• 5 x long special nozzles, 16 cm, Art. No. 10589
• 1 x universal smoothing agent, 1,000 ml, Art. No. 11215
• 5 x joint nozzles without extension, Art. No. 11571
• 5 x threaded sealing caps, Art. No. 11598
• 1 x toolbox with insert, 450 x 200 x 255 mm, Art. No. 11669
• 1 x Meister utility knife, carpet knife and cutter, Art. No. 11700
• 1 x Silisaver for economical silicone application, Art. No. 11930
• 10 x silicone nozzle sealing plugs, Art. No. 11933
• 1 x Meister joint cleaner, Art. No. 11960
• 1 x pack of six replacement blades, Art. No. 11961
• 1 x Acryclean silicone remover, 500 ml, Art. No. 12907

Remove and prepare silicone joints with the silicone joint restoration kit

Before a new joint is applied, the existing silicone should be removed as completely as required. Remaining silicone, loose material and unsuitable residues can negatively affect adhesion and the subsequent result. The silicone joint restoration kit provides several coordinated tools for these preparatory stages.

The Meister utility knife enables controlled cuts along the joint edges. The Meister joint cleaner supports targeted removal from inside the joint. Six replacement blades are supplied for replacing worn blades. Acryclean silicone remover can then be used to treat suitable residues in accordance with the relevant application and safety instructions.

The combination of cutting tools, joint cleaner and silicone remover enables the preparation method to be adapted to the condition, width and accessibility of the joint. A carefully prepared and clean connection area provides the foundation for controlled application of the new silicone.

Repair and finish joints with the silicone joint restoration kit

After preparation, new silicone can be dispensed consistently with the compact cartridge gun. Controlled feed helps create a continuous bead and reduces unnecessary interruptions. The included Silisaver supports economical and demand-based use of silicone.

Five special nozzles, five long 16 cm special nozzles, five joint nozzles without extensions and five 45-degree angled pieces allow the application equipment to be adapted to different joint widths and installation situations. They help reach corners, niches, internal edges and recessed connection areas.

The three-piece joint spatula set and the assorted silicone profiling tools support the creation of consistent joint profiles. Used together with the 1,000 ml universal smoothing agent, they help shape and finish freshly applied silicone. The processing time and instructions supplied with the selected silicone must always be observed. A silicone cartridge is not included in the specified scope of supply.

Professional joint restoration with the silicone joint restoration kit

The silicone joint restoration kit is suitable for renovation, maintenance and restoration work in bathrooms, showers, sanitary rooms, kitchens and at wall, floor and skirting connections. It is intended especially for professional tilers, sanitary installation companies, construction companies, renovation contractors, facility services and other professional users.

The threaded sealing caps and silicone nozzle sealing plugs provide a practical way to close nozzles and cartridge connections during shorter work interruptions. Whether opened sealant can be reused depends on its storage conditions and the instructions supplied by the relevant manufacturer.

All components can be stored and transported in the supplied toolbox with insert. The toolbox measures 450 x 200 x 255 mm and keeps the tools and accessories together for transport between the workshop, service vehicle and job site. The documented individual article numbers also simplify the replacement of frequently used components.

Instead of sourcing tools and accessories separately, the silicone joint restoration kit provides a comprehensive solution for recurring silicone joint restoration. The silicone used for the new joint must be selected according to the substrate, moisture exposure, required movement capability and applicable technical requirements.