Straps, 3 mm, 100 pcs, for 0 - 15 mm tiles

3 mm pull tabs 0-15 mm for wedge leveling system, 100 pieces, part no. 11096

Scope of delivery:

• Tongues 3 mm joint width
• Packaging unit: 100 pieces in plastic bag
• Color: black
• Accessories for wedge leveling system KARL DAHM

You need the 3 mm pull tabs when laying a tile.

The wedge leveling system ensures a level tile laying. For the 3 mm pull tabs you need the wedges art. no. 11084.

Application:

• First, make sure your subfloor is well prepared and completely level.
• During installation, first insert the pull tabs under the joint. After you have embedded the tile, push the wedge through the tab and fix it with the pliers until the surfaces of both tiles are at the same level.
• After the tile adhesive has hardened, break off the tab with a hammer in the direction of the joint (we recommend using a rubber hammer to avoid damaging the joint and tile, Art. 11565) or kick it off with your foot. Break off the tab only along the joint to ensure breakage at the predetermined breaking point and to avoid spalling at the tile edge.
• Then grout the surface. The base plate of the leveling system pull tabs remains under the tile surface in the tile adhesive and is then no longer visible.
• For large format tiles, it is recommended to use the buttering floating method. This means applying tile adhesive to the substrate with, for example, a 12-tooth and a contact layer on the underside of the tile with a 4-tooth.
• Once the joints are completely dry, the tile floor can be cleaned as usual.

If you have any questions, please do not hesitate to contact the Karl Dahm company at any time

• Tel: 08667 878-0
• E-mail: info@dahm-werkzeuge.de

3 mm pull tabs 0-15 mm for wedge leveling system, 100 pieces, part no. 11096

Scope of delivery:

• Tongues 3 mm joint width
• Packaging unit: 100 pieces in plastic bag
• Color: black
• Accessories for wedge leveling system KARL DAHM

You need the 3 mm pull tabs when laying a tile.

The wedge leveling system ensures a level tile laying. For the 3 mm pull tabs you need the wedges art. no. 11084.

Application:

• First, make sure your subfloor is well prepared and completely level.
• During installation, first insert the pull tabs under the joint. After you have embedded the tile, push the wedge through the tab and fix it with the pliers until the surfaces of both tiles are at the same level.
• After the tile adhesive has hardened, break off the tab with a hammer in the direction of the joint (we recommend using a rubber hammer to avoid damaging the joint and tile, Art. 11565) or kick it off with your foot. Break off the tab only along the joint to ensure breakage at the predetermined breaking point and to avoid spalling at the tile edge.
• Then grout the surface. The base plate of the leveling system pull tabs remains under the tile surface in the tile adhesive and is then no longer visible.
• For large format tiles, it is recommended to use the buttering floating method. This means applying tile adhesive to the substrate with, for example, a 12-tooth and a contact layer on the underside of the tile with a 4-tooth.
• Once the joints are completely dry, the tile floor can be cleaned as usual.

If you have any questions, please do not hesitate to contact the Karl Dahm company at any time

• Tel: 08667 878-0
• E-mail: info@dahm-werkzeuge.de

• Print this page