2-component repair adhesive, 1000 g, with hardener 30 g Order No. 11230

2-component repair adhesive incl. hardener | Art. 11230

Repair cracks in screed, in the shortest possible time with the 2-component repair adhesive from KARL DAHM.

Our repair adhesive in combination with the screed clamps/wave connectors repairs cracks in screed both indoors and outdoors.

Application:

1. vacuum out the cracks well, there should be no loose dust or dirt on the substrate (do not wipe screed wet, the substrate must be dry).
2. mix resin and hardener well (mixing ratio: 100 g resin = 3 g hardener > please follow instructions on the back of the article before use. 1 strand of 2 cm from the hardener tube corresponds to approx. 3 g).
3. let the mixed adhesive run into the cracks
4. drip time approx. 10 minutes, setting time approx. 30 minutes (follow instructions for use).

Recommended accessories:

• Crack width measuring template Art. 11550 for clear and reliable documentation of crack widths (e.g. for expert reports).
  Perfect for photo documentation. The crack width measuring template has two scales for crack widths from 0.1 to 5 mm. 
  
  
• Screed clamps/corrugated connectors Art. 11250, 11251, 11252, 11253 for repairing screed cracks
  Corrugated clips for connecting screed cracks for more stability in the screed.

2-component repair adhesive incl. hardener | Art. 11230

Repair cracks in screed, in the shortest possible time with the 2-component repair adhesive from KARL DAHM.

Our repair adhesive in combination with the screed clamps/wave connectors repairs cracks in screed both indoors and outdoors.

Application:

1. vacuum out the cracks well, there should be no loose dust or dirt on the substrate (do not wipe screed wet, the substrate must be dry).
2. mix resin and hardener well (mixing ratio: 100 g resin = 3 g hardener > please follow instructions on the back of the article before use. 1 strand of 2 cm from the hardener tube corresponds to approx. 3 g).
3. let the mixed adhesive run into the cracks
4. drip time approx. 10 minutes, setting time approx. 30 minutes (follow instructions for use).

Recommended accessories:

• Crack width measuring template Art. 11550 for clear and reliable documentation of crack widths (e.g. for expert reports).
  Perfect for photo documentation. The crack width measuring template has two scales for crack widths from 0.1 to 5 mm. 
  
  
• Screed clamps/corrugated connectors Art. 11250, 11251, 11252, 11253 for repairing screed cracks
  Corrugated clips for connecting screed cracks for more stability in the screed.

• Print this page