Threaded tab Long | 6cm high, 3 mm base Threaded tab 150 pieces Art. 12586
Stock
on stock
Delivery time 1-3 days
Description
Threaded tabs with long thread for joints with 3 mm width | 150 pieces in a bag
These threaded tabs are perfect for laying thick slabs 12 - 30 mm outdoors.
Advantages Threaded brackets base long:
- 3 mm joint width
- extra long thread (total height 6 cm)
- for thick plates 12 - 30 mm
- suitable for outdoor installation
- can be used with all Levelmac levelling systems Pulling caps
The easy installation with the tile levelling system from KARL DAHM
Lay even large, thick slabs 12 - 30 mm thick without overlapping and perfectly with the Tile Levelling System and the new, extra long threaded tabs with 3 mm joint width from KARL DAHM.
Application:
- Make sure the substrate is perfectly prepared, it should not have any hollow or raised areas
- Apply the adhesive evenly. For large tiles, you should use the buttering-floating method (apply the adhesive both to the substrate and a thin layer to the back of the tile)
- Place the first tile in the adhesive and place (depending on the side length of the tile) two to three threaded tabs under the tile, place the next tile on the first tile so that the threaded tabs are fixed between the tiles
- Turn the pulling caps onto the threaded tabs and level the tiles to a level
- Allow the tile adhesive to cure as usual, after which the pulling hoods can be turned off. The threaded tabs are broken off in the direction of the joint at the predetermined breaking point, the base plates of the threaded tabs are not visible under the tiles and can be grouted as usual.
The pulling hoods of the tile levelling system are reusable
The long threaded lugs fit all levelling system caps:
- no. 12456 Pulling caps black for tile thickness 3 - 12 mm
- no. 12475 Pulling caps grey for tile thickness 12 - 20 mm
- no. 12542 Pulling caps transparent for tile thickness 3 - 12 mm
- no. 12480 Foldable pull caps for tile thickness 3 - 18 mm
Additional Informations
Additional Information:
Accessories
€
79,50 excl. VAT
€
94,61 incl. VAT
150 item
(€ 0,63 / item)
€
79,50 excl. VAT
€
94,61 incl. VAT
150 item
(€ 0,63 / item)
€
92,70 excl. VAT
€
110,31 incl. VAT
150 item
(€ 0,74 / item)
Query on the Item?
Do you have any questions on this item?
Description
Additional Informations
Accessories
Query on the Item?
Threaded tabs with long thread for joints with 3 mm width | 150 pieces in a bag
These threaded tabs are perfect for laying thick slabs 12 - 30 mm outdoors.
Advantages Threaded brackets base long:
- 3 mm joint width
- extra long thread (total height 6 cm)
- for thick plates 12 - 30 mm
- suitable for outdoor installation
- can be used with all Levelmac levelling systems Pulling caps
The easy installation with the tile levelling system from KARL DAHM
Lay even large, thick slabs 12 - 30 mm thick without overlapping and perfectly with the Tile Levelling System and the new, extra long threaded tabs with 3 mm joint width from KARL DAHM.
Application:
- Make sure the substrate is perfectly prepared, it should not have any hollow or raised areas
- Apply the adhesive evenly. For large tiles, you should use the buttering-floating method (apply the adhesive both to the substrate and a thin layer to the back of the tile)
- Place the first tile in the adhesive and place (depending on the side length of the tile) two to three threaded tabs under the tile, place the next tile on the first tile so that the threaded tabs are fixed between the tiles
- Turn the pulling caps onto the threaded tabs and level the tiles to a level
- Allow the tile adhesive to cure as usual, after which the pulling hoods can be turned off. The threaded tabs are broken off in the direction of the joint at the predetermined breaking point, the base plates of the threaded tabs are not visible under the tiles and can be grouted as usual.
The pulling hoods of the tile levelling system are reusable
The long threaded lugs fit all levelling system caps:
- no. 12456 Pulling caps black for tile thickness 3 - 12 mm
- no. 12475 Pulling caps grey for tile thickness 12 - 20 mm
- no. 12542 Pulling caps transparent for tile thickness 3 - 12 mm
- no. 12480 Foldable pull caps for tile thickness 3 - 18 mm
Additional Information:
€
79,50 excl. VAT
€
94,61 incl. VAT
150 item
(€ 0,63 / item)
€
79,50 excl. VAT
€
94,61 incl. VAT
150 item
(€ 0,63 / item)
€
92,70 excl. VAT
€
110,31 incl. VAT
150 item
(€ 0,74 / item)
Do you have any questions on this item?
Related Products
Customers who bought this product also bought these items:
€ 55,85
€
45,90 excl. VAT
€
54,62 incl. VAT
€
79,50 excl. VAT
€
94,61 incl. VAT
150 item
(€ 0,63 / item)
€
9,79 excl. VAT
€
11,65 incl. VAT
100 item
(€ 0,12 / item)
€ 102,75
€
79,50 excl. VAT
€
94,61 incl. VAT
150 item
(€ 0,63 / item)