Pull bonnets 50 pieces, black, for tile thickness 3-12 mm, Art. 12805
Pull bonnets 50 pieces, black, for tile thickness 3-12 mm
Black pulling bonnets for the Karl Dahm tile levelling system. Laying tiles with ease, without any excess teeth - Karl Dahm makes it possible! Our pulling bonnets can also be used for multiple levelling processes and are compatible with all threaded lugs and tiles with a tile thickness of 3 - 12 mm. They are an extremely important component when laying tiles flat and are crucial for a perfect finish to the levelling process. By screwing them on, your tiles are brought to the same level.
Step-by-step instructions:
1. insert threaded lugs under the tile
2. screw the pulling bonnets onto the threaded lugs and lift the tiles to the desired level with just a few turns
3. once the adhesive has hardened, simply unscrew the pulling bonnets again and break off the threaded lugs at the predetermined breaking point (the part of the threaded lugs that is no longer visible remains in the tile adhesive)
Practical accessories:
For sensitive surfaces, we also recommend
- the washers Art. 12489 against damage
- the new Levelmac® protective plate Art. 12536 against discolouration, scratches and displacement
For easy installation:
- the Levelmac® screwing & assembly aid Art. 12519 makes screwing and unscrewing easier for you
- the new levelling bracket for internal and external corners Art. 11963
Do you have any questions or would you like personal advice on our pulling bonnets or the rotary levelling system?
We are at your disposal.
Tel. 08667-878-0
E-mail: info@dahm-werkzeuge.de
Pull bonnets 50 pieces, black, for tile thickness 3-12 mm
Black pulling bonnets for the Karl Dahm tile levelling system. Laying tiles with ease, without any excess teeth - Karl Dahm makes it possible! Our pulling bonnets can also be used for multiple levelling processes and are compatible with all threaded lugs and tiles with a tile thickness of 3 - 12 mm. They are an extremely important component when laying tiles flat and are crucial for a perfect finish to the levelling process. By screwing them on, your tiles are brought to the same level.
Step-by-step instructions:
1. insert threaded lugs under the tile
2. screw the pulling bonnets onto the threaded lugs and lift the tiles to the desired level with just a few turns
3. once the adhesive has hardened, simply unscrew the pulling bonnets again and break off the threaded lugs at the predetermined breaking point (the part of the threaded lugs that is no longer visible remains in the tile adhesive)
Practical accessories:
For sensitive surfaces, we also recommend
- the washers Art. 12489 against damage
- the new Levelmac® protective plate Art. 12536 against discolouration, scratches and displacement
For easy installation:
- the Levelmac® screwing & assembly aid Art. 12519 makes screwing and unscrewing easier for you
- the new levelling bracket for internal and external corners Art. 11963
Do you have any questions or would you like personal advice on our pulling bonnets or the rotary levelling system?
We are at your disposal.
Tel. 08667-878-0
E-mail: info@dahm-werkzeuge.de