Epoxy resin adhesive - Akepox® 2010 Gel-Mix – two-component adhesive for natural stone, artificial stone and concrete
The epoxy resin adhesive - Akepox 2010 Gel Mix is a high-quality, gel-like two-component epoxy resin-based adhesive with a modified polyamine hardener – specially developed for the professional processing of natural stone, artificial stone, and building materials such as concrete. Its drip-free consistency makes it particularly suitable for bonding vertical surfaces and overhead work. The adhesive adheres reliably even to slightly damp substrates.
Technical details at a glance:
-
Product type: 2-component epoxy resin adhesive (resin + hardener)
-
Consistency: Gel-like, non-drip (thixotropic)
-
Color: Honey yellow (before coloring)
-
Mixing ratio: 2:1 (resin : hardener)
-
Processing temperature: +10°C to +30°C
-
Processing time: approx. 20–30 minutes at 20°C
-
Ready for transport: after approx. 6–8 hours
-
Sandable and resilient: after approx. 12–16 hours
-
Final strength: after approx. 7 days
-
Temperature resistance: up to approx. 70°C (loaded), up to 110°C (unloaded)
-
Packaging unit: 450g (300g resin + 150g hardener)
Akepox 2010 Gel-Mix is the ideal solution for precise bonding in natural stone processing, construction, and restoration – especially where moisture, weather, and stress place high demands on the bonding technology. Order now and work professionally. Rely on reliable quality when processing natural and artificial stone: Akepox 2010 Gel-Mix offers you the safety, precision, and adhesive strength you need for demanding bonding applications – even under difficult conditions.
This construction adhesive is solvent-free, weatherproof, and suitable for fine bonding joints as well as for load-bearing structural components. It is particularly valued for indoor and outdoor use due to its high mechanical strength and excellent weather resistance. Curing occurs with virtually no shrinkage, which minimizes stress in the adhesive layer. This not only improves long-term stability but also makes the adhesive ideal for sensitive materials or delicate applications. Thanks to its good dimensional stability and low tendency to fatigue, the Akepox 2010 adhesive is also durable. Coloring the adhesive is easy – with AKEPOX color pastes or concentrates, the color can be individually adapted to the stone. This creates a harmonious overall appearance, especially with visible bonding joints.
Particularly noteworthy is its alkali stability, which makes it permanently safe for use with concrete. The product also impresses with its good heat resistance: for stressed bonds up to approximately 60–70°C, and for unstressed bonds even up to 100–110°C. Thanks to its solvent-free formulation, Akepox 2010 is also suitable for applications with gas-impermeable materials such as glass or metal. The processing time is approximately 20 to 30 minutes (at 20°C). The bonded parts are ready for transport after just 6 to 8 hours, and can be loaded and sanded after 12 to 16 hours. Maximum strength is achieved after 7 days.
Which materials is Akepox 2010 suitable for?
Suitable for natural stone, artificial stone, concrete, metal and glass
The epoxy Akepox 2010 adhesive is a versatile two-component adhesive for natural stone, artificial stone, concrete, and gas-impermeable materials such as glass or metal. Thanks to its high adhesive strength, weather resistance, and alkali stability, Akepox 2010 Gel Mix is ideal for demanding bonding applications both indoors and outdoors. The adhesive is frequently used in natural stone processing, construction, and restoration – even on slightly damp substrates.
Does the surface have to be dry?
Slightly damp surfaces are no problem
Akepox 2010 adheres reliably even to slightly damp surfaces. Unlike many other adhesives, this epoxy resin adhesive does not lose its adhesive strength when the substrate is slightly damp. This makes it particularly useful for work on construction sites where complete dryness cannot always be guaranteed. Nevertheless, standing water should be avoided.
Can the glue be colored?
Yes, with Akepox color pastes or concentrates
The adhesive can be precisely color-matched to the stone. Akepox 2010 can easily be colored with special Akepox color pastes or pigment concentrates. This is especially important for visible adhesive joints, such as those found in marble or granite, to achieve a harmonious overall appearance. Coloring does not affect the adhesive strength or curing.
How long is the processing time?
About 20 to 30 minutes at 20°C
The adhesive remains workable for a sufficiently long time and then cures quickly. After mixing the two components (2:1 ratio), the open time is approximately 20–30 minutes at room temperature. The bonded joint is ready for transport after just 6 to 8 hours. The bond can be fully loaded and sanded after approximately 12 to 16 hours. Maximum final strength is achieved after 7 days.
Is the adhesive suitable for vertical surfaces or overhead work?
Yes, thanks to its gel-like consistency
The thixotropic formulation prevents dripping and ensures a secure hold. The gel-like, stable consistency of Akepox 2010 makes it ideal for applications on vertical surfaces or overhead. The adhesive does not drip and stays reliably in place until it begins to cure – ideal for assembly work and precise work on edges, baseboards, or wall surfaces. Buy now directly online and benefit from a proven professional adhesive. Fast delivery – easy application – impressive results.
Order now and work professionally Rely on reliable quality when processing natural and artificial stone: Akepox 2010 Gel-Mix offers you the safety, precision and adhesive strength you need for demanding bonding – even under difficult conditions.
Do you have any questions on this item?
