Distance measuring device for large formats up to 120 cm | Art. 12881
Distance measuring device for large formats up to 120 cm Art. 12881 - NEW at KARL DAHM
Advantages:
- Error-free and exact measurement and transmission of distances in seconds
- For tiles up to 120 cm in size
- Precise measuring without a metre rule
- No expensive waste due to measurement errors
- Easy to use
Application videos for our distance measuring device
The application in a few steps:
1. place the distance measuring device on the tile and adjust the distance. Fix with the set screw
2. place the distance measuring device on the next tile and simply transfer the distance - DONE!
Simply measure distances and transfer them at lightning speed
With the distance measuring device for tiles up to 120 cm you save time and annoying measuring with the measuring stick. This simple but ingenious tool makes your work on the construction site much easier. The distance measuring device consists of two measuring rods that can be pushed continuously into each other with a fixing screw and a 2 mm stop for exact positioning at the tile edge.
To measure and transfer, simply place the distance measuring device on the edge of the tile and push the upper measuring bar as far as the corresponding distance should be (e.g. up to the wall). Fix the distance with the turning screw and place the distance measuring device on the next tile. Transfer the measured distance with a marker pen. You have now drawn the exact distance and can start working on the tile.
The distance measuring device is suitable for the following work:
- Transferring wall distances to the tiles
- Transferring drill holes to the tiles
- Measure inclined ceiling and wall distances
>> The distance measuring device is also available for tiles up to 60 cm!
Distance measuring device for large formats up to 120 cm Art. 12881 - NEW at KARL DAHM
Advantages:
- Error-free and exact measurement and transmission of distances in seconds
- For tiles up to 120 cm in size
- Precise measuring without a metre rule
- No expensive waste due to measurement errors
- Easy to use
Application videos for our distance measuring device
The application in a few steps:
1. place the distance measuring device on the tile and adjust the distance. Fix with the set screw
2. place the distance measuring device on the next tile and simply transfer the distance - DONE!
Simply measure distances and transfer them at lightning speed
With the distance measuring device for tiles up to 120 cm you save time and annoying measuring with the measuring stick. This simple but ingenious tool makes your work on the construction site much easier. The distance measuring device consists of two measuring rods that can be pushed continuously into each other with a fixing screw and a 2 mm stop for exact positioning at the tile edge.
To measure and transfer, simply place the distance measuring device on the edge of the tile and push the upper measuring bar as far as the corresponding distance should be (e.g. up to the wall). Fix the distance with the turning screw and place the distance measuring device on the next tile. Transfer the measured distance with a marker pen. You have now drawn the exact distance and can start working on the tile.
The distance measuring device is suitable for the following work:
- Transferring wall distances to the tiles
- Transferring drill holes to the tiles
- Measure inclined ceiling and wall distances
>> The distance measuring device is also available for tiles up to 60 cm!
