Dust Butler Dry & Wet, Art. No. 12087
Dust Butler Dry & Wet
The Dust Butler Dry & Wet 12087 enables low-dust drilling and also serves as a tapping jig up to Ø 162 mm.
The Dust Butler Dry & Wet is perfect for dust-free work! You can drill without leaving any dirt behind.
The Dust Butler is suitable for any standard vacuum cleaner. Likewise, the Dust Butler Dry & Wet is suitable for wet application, for example, core drilling.
Dust is a common problem on construction sites, how construction sites are left behind is a criterion for many customers - for example, in terms of recommendation.
How to use the Dust Butler Dry & Wet:
- 1. connect the vacuum cleaner hose to the rubber adapter of the Dust Butler.
- 2. Now position the Dust Butler where you want it (on the wall or on an uncovered tile).
- 3. Press the Dust Butler lightly onto the material to be drilled and switch on the vacuum cleaner.
The dust butler will tighten on its own due to the vacuum. - 4. drill the required holes with the angle grinder or with a drill.
- 5. Especially when drilling on the wall, ensure that the Dust Butler is held in place after the vacuum cleaner is switched off to avoid uncontrolled detachment and prevent possible damage.
Safety Requirements:
Always follow general safety requirements when working with hand-held electrical equipment. Always secure the work material reliably. Use individual protection.
Our Dust Butler, the new innovation for virtually dust-free drilling of holes in walls and floors, is also available in sizes:
Item number 12073 - Dust Butler Mini suction aid 18mm in diameter.
Article number 12074 - Dust Butler Maxi suction aid 82mm in diameter
Item number 12075 - Dust Butler Universal with bubble level 82mm perfect for sockets
Ensure a dust-free workplace with our Dust Butlers. The Dust Butler extraction aids from Karl Dahm are the perfect helpers on the construction site, if you want to drill holes in the wall or floor afterwards. With this suction aid they drill holes almost dust-free.
See for yourself!
Dust Butler Dry & Wet
The Dust Butler Dry & Wet 12087 enables low-dust drilling and also serves as a tapping jig up to Ø 162 mm.
The Dust Butler Dry & Wet is perfect for dust-free work! You can drill without leaving any dirt behind.
The Dust Butler is suitable for any standard vacuum cleaner. Likewise, the Dust Butler Dry & Wet is suitable for wet application, for example, core drilling.
Dust is a common problem on construction sites, how construction sites are left behind is a criterion for many customers - for example, in terms of recommendation.
How to use the Dust Butler Dry & Wet:
- 1. connect the vacuum cleaner hose to the rubber adapter of the Dust Butler.
- 2. Now position the Dust Butler where you want it (on the wall or on an uncovered tile).
- 3. Press the Dust Butler lightly onto the material to be drilled and switch on the vacuum cleaner.
The dust butler will tighten on its own due to the vacuum. - 4. drill the required holes with the angle grinder or with a drill.
- 5. Especially when drilling on the wall, ensure that the Dust Butler is held in place after the vacuum cleaner is switched off to avoid uncontrolled detachment and prevent possible damage.
Safety Requirements:
Always follow general safety requirements when working with hand-held electrical equipment. Always secure the work material reliably. Use individual protection.
Our Dust Butler, the new innovation for virtually dust-free drilling of holes in walls and floors, is also available in sizes:
Item number 12073 - Dust Butler Mini suction aid 18mm in diameter.
Article number 12074 - Dust Butler Maxi suction aid 82mm in diameter
Item number 12075 - Dust Butler Universal with bubble level 82mm perfect for sockets
Ensure a dust-free workplace with our Dust Butlers. The Dust Butler extraction aids from Karl Dahm are the perfect helpers on the construction site, if you want to drill holes in the wall or floor afterwards. With this suction aid they drill holes almost dust-free.
See for yourself!
