Extraction bonnet for mitres, Art. 12136
Karl Dahm Extraction hood for miters, Item No. 12136
For low dust cutting of miters free hand
This dust extraction hood was specially developed for cutting miters freehand. With an additional integrated rubber sealing lip, the hood offers optimum dust protection and solves the dust problem as soon as it arises. Experience has shown that a great deal of dust is generated, especially when miter cutting, since cutting and lateral grinding are performed in a single operation. Extremely simple assembly and handling characterize this product.
Features:
Can be used with all common angle grinders with conventional disc protection (115mm or 125mm).
Suitable for all miter angles
Can be used for all types of tiles and natural stone up to 15mm
Particularly easy to assemble and adjust
Assembly and use.
Hook the angle grinder with the disc guard into the notches provided (115mm or 125mm) and tighten with the locking screw. It is best to use a speed-controlled angle grinder with at least 800 watts of power. As cut-off wheels specially suitable miter wheels would be recommended! E.g. our Art.No. 50353 for very fine and clean cuts on materials up to 8 mm, or our Art. No. 50354 for materials up to 15mm thickness.
Karl Dahm Extraction hood for miters, Item No. 12136
For low dust cutting of miters free hand
This dust extraction hood was specially developed for cutting miters freehand. With an additional integrated rubber sealing lip, the hood offers optimum dust protection and solves the dust problem as soon as it arises. Experience has shown that a great deal of dust is generated, especially when miter cutting, since cutting and lateral grinding are performed in a single operation. Extremely simple assembly and handling characterize this product.
Features:
Can be used with all common angle grinders with conventional disc protection (115mm or 125mm).
Suitable for all miter angles
Can be used for all types of tiles and natural stone up to 15mm
Particularly easy to assemble and adjust
Assembly and use.
Hook the angle grinder with the disc guard into the notches provided (115mm or 125mm) and tighten with the locking screw. It is best to use a speed-controlled angle grinder with at least 800 watts of power. As cut-off wheels specially suitable miter wheels would be recommended! E.g. our Art.No. 50353 for very fine and clean cuts on materials up to 8 mm, or our Art. No. 50354 for materials up to 15mm thickness.
Related Products
Customers who bought this product also bought these items:
