Paving pedastal, height-adjustable 120-170 mm, no. 12535
Self-levelling pedestal bearing 120-170 mm for laying floor slabs
The height-adjustable stilted bearings are self-levelling and thus allow a level plate surface, even if the ground has a gradient. They can be used to lay terrace or floor slabs, for example, without the use of mortar. Rainwater can thus run off unhindered through slopes. Pipes running under the slabs can remain in place or be laid.
Paving pedestals Advantages:
- Rainwater runs off unhindered through the gradient
- Mortar-free, permanent outdoor installation, existing pipes can remain or new ones can be laid.
- Self-levelling pedestal bearings compensate for gradients in the subsoil
- Adjustable to corners and edges due to cut-to-size base plates of the pedestal bearings
- Non-slip and sound-absorbing upper part due to rubber coating
Joint width for all pedestal bearings: 2 mm
Our tip: For large areas, please request an offer! End and skirting boards on request!
If you have any questions or need technical advice: just give us a call.
Phone 08667 878-120
or write us:
info@dahm-werkzeuge.de
Self-levelling pedestal bearing 120-170 mm for laying floor slabs
The height-adjustable stilted bearings are self-levelling and thus allow a level plate surface, even if the ground has a gradient. They can be used to lay terrace or floor slabs, for example, without the use of mortar. Rainwater can thus run off unhindered through slopes. Pipes running under the slabs can remain in place or be laid.
Paving pedestals Advantages:
- Rainwater runs off unhindered through the gradient
- Mortar-free, permanent outdoor installation, existing pipes can remain or new ones can be laid.
- Self-levelling pedestal bearings compensate for gradients in the subsoil
- Adjustable to corners and edges due to cut-to-size base plates of the pedestal bearings
- Non-slip and sound-absorbing upper part due to rubber coating
Joint width for all pedestal bearings: 2 mm
Our tip: For large areas, please request an offer! End and skirting boards on request!
If you have any questions or need technical advice: just give us a call.
Phone 08667 878-120
or write us:
info@dahm-werkzeuge.de