Sigma Kera Cut Extendable cutting bar 172 + 172 cm | no. 12249
Sigma Kera Cut | Extendable cutting bar 172 + 172 cm cutting length, Art. 12249
2-part cutting rail for large formats with 3 suction cups and stable plug-in connection.
Advantages of the Sigma Kera Cut extendable cutting rail:
- The slide carriage has coated rollers with double ball bearings on hardened rails
- The rail is fixed to the tiles with the new "anti-stain suction cups", these can be positioned freely and are also suitable for rough surfaces
- At the lower part the guides are covered with non-slip and dirt-repellent rubber
Scope of delivery:
- 2x cutting bar 172 cm
- 3 "anti-stain" suction cups
- 1 cutting slide
- 1 rail connector
- 1 crusher
- 1 transport bag
Cutting rail for large formats - Sigma Kera Cut extendable
This cutting system is perfect for the processing of large tiles. The Sigma Kera Cut cutting rail is divisible and consists of two cutting rails with 172 cm cutting length each. Large format tiles up to approx. 8 mm thick can be cut with this cutting rail without any problems. For this purpose we recommend the Universal Breaking Device Art. 11204 or the Ideal Breaking Nippers Dahm® Art. 10889.
Due to its divisible function, the Sigma Kera Cut cutting bar is perfectly suited for everyday tiling work. It can be plugged together to the desired length at any time as required. This means that you do not need two extra cutting rails or tile cutters if the formats are a little larger. You save weight and space.
The cutting rail comes in a practical carrying bag with a pair of pliers and 3 anti-stain suction cups. These leave no marks on the tiles and can be positioned freely on the cutting rail. They also provide a secure hold even on rough surfaces.
The rollers of the cutting carriage are coated and therefore run smoothly and without jerking over the cutting rail. The cutting slide has two handles, so that sufficient pressure can be built up during cutting. This enables a very deep cut into the material.
Accessoire recommandé pour la barre de coupe extensible Sigma Kera Cut :
Sigma Kera Cut | Extendable cutting bar 172 + 172 cm cutting length, Art. 12249
2-part cutting rail for large formats with 3 suction cups and stable plug-in connection.
Advantages of the Sigma Kera Cut extendable cutting rail:
- The slide carriage has coated rollers with double ball bearings on hardened rails
- The rail is fixed to the tiles with the new "anti-stain suction cups", these can be positioned freely and are also suitable for rough surfaces
- At the lower part the guides are covered with non-slip and dirt-repellent rubber
Scope of delivery:
- 2x cutting bar 172 cm
- 3 "anti-stain" suction cups
- 1 cutting slide
- 1 rail connector
- 1 crusher
- 1 transport bag
Cutting rail for large formats - Sigma Kera Cut extendable
This cutting system is perfect for the processing of large tiles. The Sigma Kera Cut cutting rail is divisible and consists of two cutting rails with 172 cm cutting length each. Large format tiles up to approx. 8 mm thick can be cut with this cutting rail without any problems. For this purpose we recommend the Universal Breaking Device Art. 11204 or the Ideal Breaking Nippers Dahm® Art. 10889.
Due to its divisible function, the Sigma Kera Cut cutting bar is perfectly suited for everyday tiling work. It can be plugged together to the desired length at any time as required. This means that you do not need two extra cutting rails or tile cutters if the formats are a little larger. You save weight and space.
The cutting rail comes in a practical carrying bag with a pair of pliers and 3 anti-stain suction cups. These leave no marks on the tiles and can be positioned freely on the cutting rail. They also provide a secure hold even on rough surfaces.
The rollers of the cutting carriage are coated and therefore run smoothly and without jerking over the cutting rail. The cutting slide has two handles, so that sufficient pressure can be built up during cutting. This enables a very deep cut into the material.