Soap dispenser Royal Flush, stainless steel look – the discreet solution for modern bathrooms and WCs
The Royal Flush soap dispenser in elegant stainless steel look is the stylish solution for anyone who wants to create a modern, calm and high-quality bathroom or kitchen design. Instead of a visible plastic liquid soap bottle on the washbasin or at the sink, the discreet dispenser blends harmoniously into the surface and creates a clear, tidy appearance.
Advantages of the Royal Flush soap dispenser at a glance:
- This is what makes the Royal Flush soap dispenser special:
- Discreet, modern design in stainless steel look
- Visually high-quality alternative to visible plastic soap dispensers
- Ideal for minimalist bathroom or kitchen design
- Clean dosing thanks to practical pump function
- Concealed bottle under washbasin, worktop or sink
- Easy to refill from above – without complicated disassembly
- Rotatable pump head for flexible alignment
- Suitable for liquid soap, washing-up liquid or lotion
Thanks to the discreet installation, only the soap dispenser head in stainless steel look remains visible. The matching soap pump bottle is mounted below the worktop, washbasin or sink and disappears unobtrusively inside the cabinet. This creates a minimalist overall look without distracting elements – ideal for modern bathrooms, guest WCs, kitchens and washbasin solutions with high design standards.
The dispenser can be conveniently refilled from above without having to remove the bottle every time. The rotatable pump head allows flexible alignment of the spout and ensures clean, simple dosing of liquid soap, washing-up liquid or lotion.
Dimensions of the soap dispenser:
- Spout length: approx. 9.5 cm
- Pump head height: approx. 5.5 cm
- Thread height: approx. 6 cm
- Thread diameter: approx. 2.3 cm
- Bottle height: approx. 15.5 cm
- Bottle diameter: approx. 5.4 cm
- Suitable opening: approx. 25 mm
- Capacity: approx. 300 ml
Scope of delivery:
- 1x soap dispenser pump head in stainless steel look
- 1x bottle, approx. 300 ml
- 1x thread for fastening, also suitable for 3 cm thick tiles
Custom soap dispenser made from leftover tile material
The Royal Flush soap dispenser looks especially high-quality when combined with a custom-made soap container made from leftover tile material. This allows tilers to use offcuts of the already installed tile to create a matching soap dispenser body in the same look as the washbasin, wall or shelf surface. The pump head in stainless steel look discreetly complements the overall design and ensures that the soap dispenser blends harmoniously into the customer’s bathroom concept.
Correct installation of the Royal Flush soap dispenser
For clean and professional installation of the Royal Flush soap dispenser, the dispenser is inserted directly into the washbasin, tile or a suitable work surface. A 25 mm hole is recommended, for example using a MATRIXTEC drill bit (art.-no. 50810). This leaves sufficient clearance between the thread and the tile, making later installation easier. After drilling, the edge of the opening should be lightly deburred and smoothed with a countersink cutter (art.-no. 50339). This helps avoid sharp cut edges and allows the pump head to sit cleanly on the surface. The bottle is then positioned below the surface, the pump head in stainless steel look is inserted into the hole from above and both parts are connected and secured using the thread. This creates a discreet, high-quality solution that can be ideally integrated into modern washbasin installations.
Visually appealing solution for a calm bathroom design
The Royal Flush soap dispenser in stainless steel look is aimed at everyone who values clean lines, discreet technology and harmonious design. In high-quality bathrooms in particular, conventional liquid soap bottles often look distracting. With this soap dispenser, the bottle disappears from the visible area, while the pump head in stainless steel look deliberately reduces and elegantly complements the design.
Whether at the washbasin, next to the sink or in the kitchen at the sink, the dispenser combines practical everyday use with a modern look. This makes it ideal for bathrooms, kitchens and design-oriented sanitary areas.
FAQ – Frequently asked questions about the Royal Flush soap dispenser, stainless steel look
Where can the soap dispenser be installed?
The soap dispenser can be installed in washbasins, worktops, sinks or comparable surfaces.
It is suitable for use in the bathroom, kitchen or utility room. It is important that a suitable opening is available and that there is enough space below the surface for the approx. 300 ml bottle.
Which liquids is the dispenser suitable for?
The dispenser is suitable for any non-corrosive liquids.
The dispenser can be used flexibly in the bathroom, kitchen or utility room as required. For example, as a soap dispenser at the washbasin, as a washing-up liquid dispenser at the kitchen sink or as a shampoo bottle in the shower.
How is the soap dispenser refilled?
The Royal Flush soap dispenser can be conveniently refilled from above.
Liquid soap, washing-up liquid or lotion is simply refilled through the opening at the pump head. The bottle mounted underneath does not have to be unscrewed or removed every time.
Why is the soap dispenser ideal for modern bathrooms?
The soap dispenser is ideal for modern bathrooms because the bottle is mounted out of sight and only the pump head in stainless steel look remains visible, perfectly complementing a harmonious and minimalist design.
This means there is no distracting visible plastic bottle on the washbasin, making the bathroom look much tidier, calmer and more high-quality. The visible pump head in stainless steel look blends discreetly into modern bathroom concepts and supports a clean, reduced appearance.
Do you have any questions on this item?
