Threaded lugs Base 2 mm LEVELMAC | 10.000 pieces, ref. 13507

Threaded lugs Base 10,000 pieces, 2 mm joint width | Art. 13507 Levelmac levelling system

Buy now in stock and save 30 %!

Threaded lugs base Art. 13507 Scope of delivery:

• 10.000 pieces joint width 2 mm

Advantages of the KARL DAHM Levelmac levelling system:

• Laying large tiles without overlapping teeth - on walls and floors
• Quick and easy application - no additional tools required
• No complaints due to protruding edges
• Perfect joint pattern
• Cheap to buy

The simple levelling system Levelmac application:

1. Place the threaded tabs base under the tiles so that they are fixed in the joints
2. Screw the pulling hoods onto the threads of the threaded brackets and level the tiles next to each other
3. Allow the adhesive to cure completely, then you can unscrew the pulling hoods from the threaded tabs (the pulling hoods are reusable).
4. Break off the protruding pins of the threaded brackets in the direction of the joint and grout your tiled floor as usual

Do you have questions about the levelling system application? Just give us a call: 08667 878-0

Further accessories for the tile levelling system Levelmac can be found here!

Threaded lugs Base 10,000 pieces, 2 mm joint width | Art. 13507 Levelmac levelling system

Buy now in stock and save 30 %!

Threaded lugs base Art. 13507 Scope of delivery:

• 10.000 pieces joint width 2 mm

Advantages of the KARL DAHM Levelmac levelling system:

• Laying large tiles without overlapping teeth - on walls and floors
• Quick and easy application - no additional tools required
• No complaints due to protruding edges
• Perfect joint pattern
• Cheap to buy

The simple levelling system Levelmac application:

1. Place the threaded tabs base under the tiles so that they are fixed in the joints
2. Screw the pulling hoods onto the threads of the threaded brackets and level the tiles next to each other
3. Allow the adhesive to cure completely, then you can unscrew the pulling hoods from the threaded tabs (the pulling hoods are reusable).
4. Break off the protruding pins of the threaded brackets in the direction of the joint and grout your tiled floor as usual

Do you have questions about the levelling system application? Just give us a call: 08667 878-0

Further accessories for the tile levelling system Levelmac can be found here!

• Print this page

Additional Information:

PDF KARL DAHM leveling system - operating instructions 6.7 MB