We use cookies in order to guarantee the best possible service. If you continue browsing the site, please consent to our cookie use.

Tile remover 50° hot air blower, order no 40983

Tile remover 50° hot air blower, order no 40983
additional images:
Price
 
EUR 598,00 excl. VAT
EUR 711,62 incl. VAT
* including VAT plus shipping
Quantity:
Total
Unit price
base price
Stock
on stock
Delivery time 1-3 days
Description

Tile removal system PROFIX with new hot air gun, order no 40983

Tile pick-up system for removing tiles the non-destructive way!

Remove and replace tiles non-destructively ?  - not so easy when you consider that some tiles are extremely firmly fixed in the tile adhesive. Normally they are laid in such a way that they last as long as possible. But from time to time it happens that the substrate has to be restored. Furthermore, replacement tiles in the same colour, shape and size are often hard to find. The conclusion is: the existing tile should possibly  be removed from the substrate as a whole so that it can be reused after renovation.

With the new tile removal system from Karl Dahm, this is now possible in no time at all. Thanks to the new, super-strong hot air blower, you can remove tiles without destroying these or adjacent tiles. The principle of the tile pick-up system is simple:

  1. First the concerned tile is exposed with a joint cutter. We recommend our cement and silicone joint cutter
    art.no. 41810 (230V) or our wet cutting complete art. no. 40690 (230V). After the joints have been removed, they must be filled with water.
  2. The tile removal system consists of a "system chamber" which is placed over the affected tile. It can be used for all common formats up to 30 or 50 cm. On the "system chamber" there are carrying handles made of non thermally conductive material. Now the hot air gun is placed in the opening of the system chamber and heated up to 600°C. The current temperature is displayed on the hot air gun.

After approx. 10 minutes, the tile should have detached itself from the substrate and be very easy to remove. Now the substrate can be renovated or tested and the tile can be laid out again or replaced.

TECHNICAL DATA HOT AIR BLOWER

  • Output: 3,400 watts
  • Temperature range: 20-600°C continuously adjustable
  • For tile formats up to 30 and 50 cm.
  • 40983 tile removal system includes a powerful hot air gun

Do you already have a powerful hot air gun?  Our PROFIX tile removal system is also available separately
i.e. hot air gun not included! Please see art.no. 40982

Additional Informations
Query on the Item?
Do you have any questions on this item?
Your E-mail Adress
My Question:
Description
Additional Informations
Query on the Item?

Tile removal system PROFIX with new hot air gun, order no 40983

Tile pick-up system for removing tiles the non-destructive way!

Remove and replace tiles non-destructively ?  - not so easy when you consider that some tiles are extremely firmly fixed in the tile adhesive. Normally they are laid in such a way that they last as long as possible. But from time to time it happens that the substrate has to be restored. Furthermore, replacement tiles in the same colour, shape and size are often hard to find. The conclusion is: the existing tile should possibly  be removed from the substrate as a whole so that it can be reused after renovation.

With the new tile removal system from Karl Dahm, this is now possible in no time at all. Thanks to the new, super-strong hot air blower, you can remove tiles without destroying these or adjacent tiles. The principle of the tile pick-up system is simple:

  1. First the concerned tile is exposed with a joint cutter. We recommend our cement and silicone joint cutter
    art.no. 41810 (230V) or our wet cutting complete art. no. 40690 (230V). After the joints have been removed, they must be filled with water.
  2. The tile removal system consists of a "system chamber" which is placed over the affected tile. It can be used for all common formats up to 30 or 50 cm. On the "system chamber" there are carrying handles made of non thermally conductive material. Now the hot air gun is placed in the opening of the system chamber and heated up to 600°C. The current temperature is displayed on the hot air gun.

After approx. 10 minutes, the tile should have detached itself from the substrate and be very easy to remove. Now the substrate can be renovated or tested and the tile can be laid out again or replaced.

TECHNICAL DATA HOT AIR BLOWER

  • Output: 3,400 watts
  • Temperature range: 20-600°C continuously adjustable
  • For tile formats up to 30 and 50 cm.
  • 40983 tile removal system includes a powerful hot air gun

Do you already have a powerful hot air gun?  Our PROFIX tile removal system is also available separately
i.e. hot air gun not included! Please see art.no. 40982

Do you have any questions on this item?
Your E-mail Adress
My Question:

Customers who bought this product also bought these items:

 
EUR 26,80 excl. VAT
EUR 31,89 incl. VAT
 
EUR 153,80 excl. VAT
EUR 183,02 incl. VAT
 
EUR 38,86 excl. VAT
EUR 46,24 incl. VAT
 
EUR 399,00 excl. VAT
EUR 474,81 incl. VAT
 
EUR 189,00 excl. VAT
EUR 224,91 incl. VAT
 
EUR 39,00 excl. VAT
EUR 46,41 incl. VAT
 
starting EUR 8,95 excl. VAT
starting EUR 10,65 incl. VAT