Chamfering flange AFF 14, Grit 70, No. 50531
50 531 Diamond Chamfering Flange AFF K70
AFF 14 chamfering flange:
The chamfering flange AFF 14 is perfectly suited for edge processing (especially for chamfering).
In addition, the chamfering flange can be used as a quick-change adapter. You first mount the diamond disc on the inner flange of the angle grinder and then screw the chamfering flange directly against it. This combination allows you to cut the tile material first and then immediately work on the tile edge with the chamfering flange without having to change diamond tool or angle grinder.
For the best result, you should guide the bevel flange evenly with light pressure over the tile edge.
Observe the general safety requirements when working with electric or diamond tools.
Easy to use:
- mount the diamond disc on the inner flange of the angle grinder.
- screw the chamfering flange directly against it
- ready!
All advantages at a glance:
- Easy edge finishing
- Also suitable for chamfering
- Also serves as a quick-change adapter
- Time saving
Technical data:
- Dimensions: assembly height 2,2cm - diameter: 5cm
- Weight: 0,16 kg
- Colour: Grey
- Material: Steel
- M14 receptacle (angle grinder)
- 70 grit
- Max. 12500 rpm
- For ceramic tiles, porcelain tiles and natural stone
If you have any questions about chamfering flange, please contact our customer service by e-mail to: info@karldahm.com
50 531 Diamond Chamfering Flange AFF K70
AFF 14 chamfering flange:
The chamfering flange AFF 14 is perfectly suited for edge processing (especially for chamfering).
In addition, the chamfering flange can be used as a quick-change adapter. You first mount the diamond disc on the inner flange of the angle grinder and then screw the chamfering flange directly against it. This combination allows you to cut the tile material first and then immediately work on the tile edge with the chamfering flange without having to change diamond tool or angle grinder.
For the best result, you should guide the bevel flange evenly with light pressure over the tile edge.
Observe the general safety requirements when working with electric or diamond tools.
Easy to use:
- mount the diamond disc on the inner flange of the angle grinder.
- screw the chamfering flange directly against it
- ready!
All advantages at a glance:
- Easy edge finishing
- Also suitable for chamfering
- Also serves as a quick-change adapter
- Time saving
Technical data:
- Dimensions: assembly height 2,2cm - diameter: 5cm
- Weight: 0,16 kg
- Colour: Grey
- Material: Steel
- M14 receptacle (angle grinder)
- 70 grit
- Max. 12500 rpm
- For ceramic tiles, porcelain tiles and natural stone
If you have any questions about chamfering flange, please contact our customer service by e-mail to: info@karldahm.com