Diamond core bit GOLD diameter 45 mm with M14 thread core art. 50411
Diamond core bit GOLD diameter 45 mm with M14 thread and paraffin core
The diamond drill bit Gold for dry driling is ideally suited for clean and precise holes with a diameter of 45 mm. Achieve the best results when drilling holes in walls and floors up to a material thickness of 30 mm. Ideal for all hard materials such as porcelain tiles and natural stone like marble and granite.
Equipped with an M14 thread this core drill bit is suitable for all common angle grinders.
No water cooling is necessary during use! The working speed should be between 10,000 and 13,000 rpm.
Application - Diamond drill bit:
- screw the drill bit onto the angle grinder spindle
- place the drill bit obliquely on the material.
- work into the material in circular movements.
Drilling should be done evenly and without pressure. Avoid overheating!
With thick, hard materials, we recommend that the tool and workpiece be allowed to cool down
from time to time
Available in the following diameters:
no. 50394 Diamond drill bit GOLD Ø 6 mm
no. 50395 Diamond drill bit GOLD Ø 8 mm
no. 50396 Diamond drill bit GOLD Ø 10 mm
no. 50397 Diamond drill bit GOLD Ø 12 mm
no. 50398 Diamond drill bit GOLD Ø 14 mm
no. 50399 Diamond drill bit GOLD Ø 18 mm
no. 50400 Diamond drill bit GOLD Ø 20 mm
no. 50406 Diamond drill bit GOLD Ø 25 mm
no. 50407 Diamond drill bit GOLD Ø 32 mm
no. 50401 Diamond drill bit GOLD Ø 35 mm
no. 50402 Diamond drill bit GOLD Ø 38 mm
no. 50409 Diamond drill bit GOLD Ø 40 mm
no. 50403 Diamond drill bit GOLD Ø 43 mm
no. 50411 Diamond drill bit GOLD Ø 45 mm
no. 50404 Diamond drill bit GOLD Ø 50 mm
no. 50412 Diamond drill bit GOLD Ø 55 mm
no. 50240 Diamond drill bit GOLD Ø 60 mm
no. 50241 Diamond drill bit GOLD Ø 65 mm
no. 50405 Diamond drill bit GOLD Ø 68 mm
no. 50413 Diamond drill bit GOLD Ø 75 mm
no. 50414 Diamond drill bit GOLD Ø 82 mm
no. 50242 Diamond drill bit GOLD Ø 100 mm
no. 50415 Diamond drill bit GOLD Ø 110 mm
no. 50416 Diamond drill bit GOLD Ø 120 mm
Diamond core bit GOLD diameter 45 mm with M14 thread and paraffin core
The diamond drill bit Gold for dry driling is ideally suited for clean and precise holes with a diameter of 45 mm. Achieve the best results when drilling holes in walls and floors up to a material thickness of 30 mm. Ideal for all hard materials such as porcelain tiles and natural stone like marble and granite.
Equipped with an M14 thread this core drill bit is suitable for all common angle grinders.
No water cooling is necessary during use! The working speed should be between 10,000 and 13,000 rpm.
Application - Diamond drill bit:
- screw the drill bit onto the angle grinder spindle
- place the drill bit obliquely on the material.
- work into the material in circular movements.
Drilling should be done evenly and without pressure. Avoid overheating!
With thick, hard materials, we recommend that the tool and workpiece be allowed to cool down
from time to time
Available in the following diameters:
no. 50394 Diamond drill bit GOLD Ø 6 mm
no. 50395 Diamond drill bit GOLD Ø 8 mm
no. 50396 Diamond drill bit GOLD Ø 10 mm
no. 50397 Diamond drill bit GOLD Ø 12 mm
no. 50398 Diamond drill bit GOLD Ø 14 mm
no. 50399 Diamond drill bit GOLD Ø 18 mm
no. 50400 Diamond drill bit GOLD Ø 20 mm
no. 50406 Diamond drill bit GOLD Ø 25 mm
no. 50407 Diamond drill bit GOLD Ø 32 mm
no. 50401 Diamond drill bit GOLD Ø 35 mm
no. 50402 Diamond drill bit GOLD Ø 38 mm
no. 50409 Diamond drill bit GOLD Ø 40 mm
no. 50403 Diamond drill bit GOLD Ø 43 mm
no. 50411 Diamond drill bit GOLD Ø 45 mm
no. 50404 Diamond drill bit GOLD Ø 50 mm
no. 50412 Diamond drill bit GOLD Ø 55 mm
no. 50240 Diamond drill bit GOLD Ø 60 mm
no. 50241 Diamond drill bit GOLD Ø 65 mm
no. 50405 Diamond drill bit GOLD Ø 68 mm
no. 50413 Diamond drill bit GOLD Ø 75 mm
no. 50414 Diamond drill bit GOLD Ø 82 mm
no. 50242 Diamond drill bit GOLD Ø 100 mm
no. 50415 Diamond drill bit GOLD Ø 110 mm
no. 50416 Diamond drill bit GOLD Ø 120 mm
