Telephone Ordering & Support: +49 8667 878 120
Informations
Deutsch franz.
  • search
  • 0
Categories
Categories

Distar CordSET – Radius Cutting Set for Porcelain Stoneware, Art. No. 40997

New
Distar CordSET radius cutting set for porcelain stoneware, Art. 40997
Distar Cordset Radius Cutting Set for tile-compatible handle plates
close show/hide sidebar
Distar CordSET radius cutting set for porcelain stoneware, Art. 40997
Distar Cordset Radius Cutting Set for tile-compatible handle plates
articlenumber: 40997
EUR 54,90 Excl. VAT *
EUR 65,33 VAT included *
plus shipping
on stock
Delivery time 1-3 days
Total
Unit price
base price
Description
Additional Informations
Query on the Item?

Distar CordSET – complete set for radius cutting in porcelain stoneware

The Distar CordSET (Art. 40997) is a ready-made set for clean radius and curved cuts in porcelain stoneware and ceramic tiles. Radii and 90° corners can be cut noticeably faster and more easily – even for work that would otherwise require a lot of experience and a steady hand.

How the system works

Cutting is done with a thin 0.5 mm diamond wire that is clamped into the quick-clamp grips. A hardened steel template guides the cutting direction for radii of 3, 6 and 12 mm and is fixed with the supplied clips and wedges. The workpiece is held all around to avoid chipping at corners and radii. Work is done wet; the included highly absorbent sponge provides the water cooling.

Scope of delivery

  • Diamond wires – 5 pieces, 30 cm each
  • Template for cutting radii (3, 6 and 12 mm) – 1 piece
  • Quick-clamp grips – 2 pieces
  • Special clips – 20 pieces
  • Plastic wedges – 4 pieces
  • Highly absorbent sponge – 1 piece

Typical applications

The CordSET speeds up making frequently needed cut-outs in porcelain stoneware – for example openings for actuator plates and tileable flush plates, ventilation openings and inspection flaps.

Service life and speed

The diamond wire is produced with a multi-layer diamond coating. According to the manufacturer it achieves up to 6 times longer service life and up to 50 % higher cutting speed than standard wires; the service life of a 30 cm wire is around 12 to 18 cm of cutting length, depending on tile thickness and cooling.

Spare parts

As consumables/spare parts, the diamond saw wire (Art. 40994) and the quick-clamp grips (Art. 13204) are available separately at Karl Dahm.

What is the Distar CordSET for?

For radius and curved cutting in porcelain stoneware and ceramic tiles.

It lets you cleanly cut radii, 90° corners and cut-outs, such as openings for tileable flush plates, ventilation and inspection flaps.

What is included in the set?

Diamond wires (5 × 30 cm), a radius template (3, 6 and 12 mm), two quick-clamp grips, 20 special clips, 4 plastic wedges and a cooling sponge.

This makes the set ready to use for wet cutting right away.

Which spare parts are available?

The diamond saw wire (Art. 40994) and the grips (Art. 13204) are available separately.

This lets you reorder used wire or replace the grips.

Is it used with water cooling?

Yes – the CordSET is designed for wet cutting; a highly absorbent sponge is included.

Water cooling reduces heat and dust and protects the diamond wire.

Do you have any questions on this item?
Your E-mail Adress
My Question:
Context

Matching accessories

Handles for Diamond Wire Saw, Art. No. 13204

Handles for Diamond Wire Saw, Art. No. 13204

EUR 19,90 Excl. VAT *
EUR 23,68 VAT included *
Diamond Saw Wire 1 m, wire thickness 0.5 mm, Art. No. 40994

Diamond Saw Wire 1 m, wire thickness 0.5 mm, Art. No. 40994

EUR 9,80 Excl. VAT *
EUR 11,66 VAT included *
Diamond Wire Saw Set (Diamond Saw Wire + Handles), Art. No. 13203

Diamond Wire Saw Set (Diamond Saw Wire + Handles), Art. No. 13203

EUR 26,90 Excl. VAT *
EUR 32,01 VAT included *

These products may also interest you:

Tileable flush plate for Geberit, TECE and Viega CLANEA PurePlate S

WC flush plate for Geberit and Tece CLANEA PurePlate S, art.-no. 16960

EUR 275,00 Excl. VAT *
EUR 327,25 VAT included *
Tileable toilet flush plate for TECE, Geberit and Viega CLANEA PurePlate R at Karl Dahm

WC flush plate for TECE and Geberit CLANEA PurePlate R, art.-no. 16961

EUR 275,00 Excl. VAT *
EUR 327,25 VAT included *
Universal tileable toilet flush plate with magnetic attachment

Universal WC flush plate, art.-no. 16915

EUR 180,00 Excl. VAT *
EUR 214,20 VAT included *
Blue lever handle plate by Karl Dahm, art.-no. 16916

Royal Flush Blue Base - tileable flush plate for Geberit Sigma, art. no. 16916

EUR 180,00 Excl. VAT *
EUR 214,20 VAT included *
Royal Flush "Side Button" push plate at Karl Dahm, item no. 16922

Royal Flush Universal - Side Button tileable push plate, art.-no. 16922

EUR 180,00 Excl. VAT *
EUR 214,20 VAT included *
Tileable push plate for Geberit urinal WC modules

Urinal push plate - Royal Flush, art. no. 16917

EUR 170,00 Excl. VAT *
EUR 202,30 VAT included *

Customers who bought this item also bought the following items: