Edge clip "Base" for the installation of outer edgings with pedestal support no. 12594

Edge clip "Base" for laying outer perimeter edges when laying terrace tiles 

The edge clip is suitable for our pedestal support Universal Art. 12560, 12561

The edge clip is used for vertical laying of tiles, for creating end edges and borders on terraces.

Properties edge clips:

• "Base" edge clip for attachment to the underside of the pedestal support 
• To create the vertical edges, you will also need no. 12597 "Head piece
• The edge clips prevent the tiles from getting out of place
• Easy to use
• For tiles with 20 mm thickness

Application:

1. To create outer perimeter edges, you will need a "Base" edge clip and a "Head" edge clip Art. 12597 (available here) in addition to the Universal pedestal supports (Art. 12560 or 12561). 
2. Attach the two clips each to the pedestal support base plate and to the upper plate (the head piece has a recess for the joint spacers of the pedestal support head plate. Only in the case of pedestal supports standing at the edge, the joint spacers must be removed). Fix the "head" edge clip to the pedestal support with silicone
3. Place the pedestal support with the edge clips in the intended position and insert the vertical tile. Use the special adjustment key art. 12565 to compensate the position of the vertical tile so that a flat surface is created.

Further accessories for the Universal pedestal support:

• no. 12597 Edge clip "Head piece" for universal pedestal support
• no. 12565 Special adjustment key 3 in 1
• no. 12541 Spacer stainless steel for expansion joints at the edge

Edge clip "Base" for laying outer perimeter edges when laying terrace tiles 

The edge clip is suitable for our pedestal support Universal Art. 12560, 12561

The edge clip is used for vertical laying of tiles, for creating end edges and borders on terraces.

Properties edge clips:

• "Base" edge clip for attachment to the underside of the pedestal support 
• To create the vertical edges, you will also need no. 12597 "Head piece
• The edge clips prevent the tiles from getting out of place
• Easy to use
• For tiles with 20 mm thickness

Application:

1. To create outer perimeter edges, you will need a "Base" edge clip and a "Head" edge clip Art. 12597 (available here) in addition to the Universal pedestal supports (Art. 12560 or 12561). 
2. Attach the two clips each to the pedestal support base plate and to the upper plate (the head piece has a recess for the joint spacers of the pedestal support head plate. Only in the case of pedestal supports standing at the edge, the joint spacers must be removed). Fix the "head" edge clip to the pedestal support with silicone
3. Place the pedestal support with the edge clips in the intended position and insert the vertical tile. Use the special adjustment key art. 12565 to compensate the position of the vertical tile so that a flat surface is created.

Further accessories for the Universal pedestal support:

• no. 12597 Edge clip "Head piece" for universal pedestal support
• no. 12565 Special adjustment key 3 in 1
• no. 12541 Spacer stainless steel for expansion joints at the edge

• Print this page