Auto-leveling universal pedestal 28-43 mm, fixable head no. 12560

Universal pedestal, low 28-43 mm  - NEW at KARL DAHM

The new Universal pedestal is part of a multifunctional system that can be used variably
and that offers many application possibilities.

Laying terrace slabs outside the other way: no mortar, no problems.

The advantages of the universal pedestal:

• Assemble your pedestal according to your requirements
• Flexible height adjustable from 28 mm to any desired height
• Self-levelling for gradient compensation up to 5%.
• Simple mechanism for switching from self-levelling to fixed head - all you need is one pedestal for everything
• Upper parts (Art. 12563, 12564) with anti-slip and sound-absorbing rubber padding

The universal pedestal system works as follows:

1. Select a basic pedestal bearing (Art. 12560 or 12561)
2. The extension ring Art. 12562 (30 mm) can be used to increase the base pedestal
   to the required height
3. Finally, select the desired joint spacer (Art. 12563 for 2 mm joints or Art. 12564 for
   4 mm joints).

Components of the universal pedestal:

• 12560 Low universal pedestal 28 - 43 mm
• 12561 Standard universal pedestal 43 - 58 mm
• 12562 Extension ring 30 mm
• 12563 Joint spacer 2 mm
• 12564 Joint spacer 4 mm

Further accessories to our universal pedestals :

• 12565 Special key 3 in 1 (3 functions: to adjust the height, change from fixed to self-levelling head or to remove the joint spacer)
• 12541 V2A wall spacer (for the expansion joint in the edge area)
• 11865 Protecting mat 22 x 22cm, 4 mm thick (for underlaying the pedestals
  in order to protect the substrate or sealing foils,etc. against damages)
• 12594 Edge clip for creating outer borders and steps "Base"
• 12597 Edge clip for creating outer borders and steps "head piece"

Universal pedestal, low 28-43 mm  - NEW at KARL DAHM

The new Universal pedestal is part of a multifunctional system that can be used variably
and that offers many application possibilities.

Laying terrace slabs outside the other way: no mortar, no problems.

The advantages of the universal pedestal:

• Assemble your pedestal according to your requirements
• Flexible height adjustable from 28 mm to any desired height
• Self-levelling for gradient compensation up to 5%.
• Simple mechanism for switching from self-levelling to fixed head - all you need is one pedestal for everything
• Upper parts (Art. 12563, 12564) with anti-slip and sound-absorbing rubber padding

The universal pedestal system works as follows:

1. Select a basic pedestal bearing (Art. 12560 or 12561)
2. The extension ring Art. 12562 (30 mm) can be used to increase the base pedestal
   to the required height
3. Finally, select the desired joint spacer (Art. 12563 for 2 mm joints or Art. 12564 for
   4 mm joints).

Components of the universal pedestal:

• 12560 Low universal pedestal 28 - 43 mm
• 12561 Standard universal pedestal 43 - 58 mm
• 12562 Extension ring 30 mm
• 12563 Joint spacer 2 mm
• 12564 Joint spacer 4 mm

Further accessories to our universal pedestals :

• 12565 Special key 3 in 1 (3 functions: to adjust the height, change from fixed to self-levelling head or to remove the joint spacer)
• 12541 V2A wall spacer (for the expansion joint in the edge area)
• 11865 Protecting mat 22 x 22cm, 4 mm thick (for underlaying the pedestals
  in order to protect the substrate or sealing foils,etc. against damages)
• 12594 Edge clip for creating outer borders and steps "Base"
• 12597 Edge clip for creating outer borders and steps "head piece"

• Print this page