Universal extension ring, 30 mm, for Universal pedestal supports art.-no. 12562

Extension ring 30 mm for universal pedestals

With the new universal pedestals there are many application possibilities but little effort when laying.

These multi-functional pedestals are practical and definitely offer added value when laying  terrace slabs outdoors.

The advantages of multifunctional pedestals:

• The universal extension rings allow for adjusting the pedestals to the desired height (Art. 12560 or 12561 to be used as base).
• Adjustable height: 28 mm to xmm
• The universal pedestals can be used with both fixed and self-levelling heads
  (2 functions in 1 pedestal bearing).
• Self-levelling pedestals compensate slopes up to 5%.
• Conversion from fixed to self-levelling pedestal by using a simple mechanism integrated in the upper part of the pedestal

How to use the universal pedestals and the extension rings:

1. Select the base pedestal – either Art. 12560 (28 - 43 mm height)
   or Art. 12561 (43 - 58 mm height)
2. Any number of extension rings (Art. 12562) can be placed on the base pedestal
   to reach the desired height.
3. To finish, select the joint width by using the appropriate upper part
   either Art. 12563 for 2 mm joints or  Art.12564 for 4 mm joints

Accessories that make installation very easy:

• Art. 12565 Special adjustment key 3in1 (for adjusting the universal pedestals)
• Art. 12541 V2A wall spacer (for even and exact wall distance)
• Art. 11865 Protecting mats for pedestals (to protect the substrate against
  possible damages caused by the pedestals)

Universal pedestal bearing - basic pedestal bearing:

• Art. 12560 Universal pedestal, low 28 - 43 mm
• Art. 12561 Universal pedestal, standard 43 - 58 mm
• Art. 12563 Joint spacer 2 mm
• Art. 12564 Joint spacer 4 mm
• Art. 12565 Key 3 in 1 to universal pedestals