Standard Straps LEVELMAC 2 mm, 5000 pcs. | no. 13506
Basic brackets for the tile levelling system Levelmac by KARL DAHM - 5000 pieces | Art. 13506
Advantage pack for large areas or in stock!
Scope of delivery:
- no. 13506 5000 pieces Basic tabs for 2 mm joint width
Advantages of the Karl Dahm tile levelling system:
- Even large tiles are always laid without overlapping and with a perfect joint pattern
- You avoid complaints due to protruding edges
- The system is easy to use and inexpensive to purchase
- You save time
- For installation on walls and floors
- You do not need additional tools such as pliers or pistols
Tile levelling system Levelmac - the clever laying aid
Especially with the ever increasing tile formats, the challenge of an over-toothless floor covering is particularly great.
Small irregularities or edges are immediately noticeable here. With the Levelmac levelling system from KARL DAHM, you avoid such overteeth and edges already during the laying process and ensure completely satisfied customers who will be delighted with the perfect result.
The KARL DAHM tile levelling system consists of two components:
- the levelling system pulling hoods (also called rotating caps, rotating hoods etc.)
- the threaded tabs (base, cross or T-piece)
The application is very easy and convinces even the professional:
- Put the flaps under the tiles, insert the tile (the flap is now fixed between the tiles)
- Screw the pulling hoods onto the threaded tabs and bring the tiles next to each other to a level
- Allow adhesive to cure completely
- Unscrew the pulling hoods (the pulling hoods are reusable) and break off the threaded lug protrusions at the predetermined breaking point (always in the direction of the joint). Then grout as usual
Accessories LEVELMAC levelling system for tiles:
For a perfect installation with the KARL DAHM tile levelling system, you do not actually need any other accessories. There are, however, accessories which considerably speed up and simplify the laying process:
Basic brackets for the tile levelling system Levelmac by KARL DAHM - 5000 pieces | Art. 13506
Advantage pack for large areas or in stock!
Scope of delivery:
- no. 13506 5000 pieces Basic tabs for 2 mm joint width
Advantages of the Karl Dahm tile levelling system:
- Even large tiles are always laid without overlapping and with a perfect joint pattern
- You avoid complaints due to protruding edges
- The system is easy to use and inexpensive to purchase
- You save time
- For installation on walls and floors
- You do not need additional tools such as pliers or pistols
Tile levelling system Levelmac - the clever laying aid
Especially with the ever increasing tile formats, the challenge of an over-toothless floor covering is particularly great.
Small irregularities or edges are immediately noticeable here. With the Levelmac levelling system from KARL DAHM, you avoid such overteeth and edges already during the laying process and ensure completely satisfied customers who will be delighted with the perfect result.
The KARL DAHM tile levelling system consists of two components:
- the levelling system pulling hoods (also called rotating caps, rotating hoods etc.)
- the threaded tabs (base, cross or T-piece)
The application is very easy and convinces even the professional:
- Put the flaps under the tiles, insert the tile (the flap is now fixed between the tiles)
- Screw the pulling hoods onto the threaded tabs and bring the tiles next to each other to a level
- Allow adhesive to cure completely
- Unscrew the pulling hoods (the pulling hoods are reusable) and break off the threaded lug protrusions at the predetermined breaking point (always in the direction of the joint). Then grout as usual
Accessories LEVELMAC levelling system for tiles:
For a perfect installation with the KARL DAHM tile levelling system, you do not actually need any other accessories. There are, however, accessories which considerably speed up and simplify the laying process: