Wedges levelling system transparent | 100 wedges | 100 tension straps | 1 pair of pliers Art. 12059

Wedges levelling system transparent, 2 mm | 100 wedges, 100 pull straps, 1 pair of pliers Art. 12059

New: transparent wedges for the wedge levelling system from KARL DAHM.

Lay large tiles on walls and floors perfectly and without overlapping
Reusable, transparent levelling system wedges for a better view of the joints and without the risk of discolouration on the tiles
Easy to use

Scope of delivery:

• 100 wedges transparent for tile thickness 0 - 12 mm
• 100 pull straps for 2 mm joint width
• 1 levelling system pliers (metal version)

Application wedge levelling system:

1. Insert the tension straps into the tile adhesive under the tile
2. Lay the next tile
3. Push a wedge through the pull tab by hand and then adjust it with the pliers until it clicks into place
4. Allow the adhesive to dry completely and break off the tension straps together with the wedge in the direction of the joint - the wedges are reusable

You will receive a perfectly laid tiled floor without overteeth and edges. Suitable for wall and floor installation.

Accessories wedge levelling system:

Our levelling brackets are perfect for the perfect laying of tiles at inner and outer corners. They fit both the wedge levelling system and the KARL DAHM Levelmac® levelling system.

The installation of 90° angles is enormously simplified thanks to the levelling brackets.

Here you can find the KARL DAHM levelling corners (Art. 11963)

Wedges levelling system transparent, 2 mm | 100 wedges, 100 pull straps, 1 pair of pliers Art. 12059

New: transparent wedges for the wedge levelling system from KARL DAHM.

Lay large tiles on walls and floors perfectly and without overlapping
Reusable, transparent levelling system wedges for a better view of the joints and without the risk of discolouration on the tiles
Easy to use

Scope of delivery:

• 100 wedges transparent for tile thickness 0 - 12 mm
• 100 pull straps for 2 mm joint width
• 1 levelling system pliers (metal version)

Application wedge levelling system:

1. Insert the tension straps into the tile adhesive under the tile
2. Lay the next tile
3. Push a wedge through the pull tab by hand and then adjust it with the pliers until it clicks into place
4. Allow the adhesive to dry completely and break off the tension straps together with the wedge in the direction of the joint - the wedges are reusable

You will receive a perfectly laid tiled floor without overteeth and edges. Suitable for wall and floor installation.

Accessories wedge levelling system:

Our levelling brackets are perfect for the perfect laying of tiles at inner and outer corners. They fit both the wedge levelling system and the KARL DAHM Levelmac® levelling system.

The installation of 90° angles is enormously simplified thanks to the levelling brackets.

Here you can find the KARL DAHM levelling corners (Art. 11963)

• Print this page