Collomix XQ2 1,200 W mixer with mixing time display, up to 50 l, art.-no. 40152

Collomix XQ2 Mixer for Everyday Construction Use

The Collomix XQ2 is a single-speed mixer for daily use on job sites. It covers mixing volumes up to 50 liters and accommodates paddles up to 140 mm in diameter – the typical range for tile adhesive, mortar, fillers, and self-leveling compounds. Operating at 1,200 watts with a load speed of 670 revolutions per minute, this single-speed device maintains its RPM even in viscous materials without bogging down.

Mixing Time Display: Reproducible Instead of by Feel

The decisive difference compared to a simple mixer is the integrated timer. Material manufacturers specify mixing times for good reason: if mixed too briefly, binder pockets remain; if mixed too long, air is stirred into certain materials or the processing time is shortened. The display on the XQ2 makes the mixing time visible and thus repeatable throughout the workday – even when multiple people are working on the same bucket.

XQ2 Tool-less Paddle Change with HEXAFIX PRO

The HEXAFIX PRO quick-change coupling holds the paddle with a positive fit and can be operated without tools. Anyone switching between different materials during the workflow – first adhesive, then grout, then self-leveling compound – saves noticeable time per swap compared to a traditional threaded connection. The adapted paddle opening keeps dust and material residues out of the coupling, benefiting smooth operation throughout its service life.

Existing devices with a 5/8" male thread can be retrofitted to the same system using the HEXAFIX PRO retrofit kit (Collomix Art. No. 49451-000). This is worthwhile if several machines are used in operations and the paddles need to remain interchangeable.

Work Quieter and More Ergonomically

Optimized airflow and additional insulation reduce noise levels by up to 50 percent compared to previous models. On the job site, this is especially important during longer mixing phases and in occupied properties. The handle arrangement is designed for an upright working posture so that the back is not subjected to constant bending during setup and operation. Rubber bumpers on all four corners protect the housing when set down on rough floors.

XQ1, XQ2, XQ4, or XQ6: Which Size Fits

The XQ2 is deliberately positioned in the lower performance range of the series. It is the right choice when predominantly bucket volumes up to 50 liters are mixed and low tool weight is more important than variable speed. Anyone who needs fine control between multiple speed settings – such as with epoxy resins or sensitive decorative fillers – is better served with the XQ4 (three speeds, up to 65 liters) or the XQ6 (eight speeds, up to 90 liters). Below the XQ2 is the XQ1, designed for paddles up to 120 mm and mixing volumes up to 40 liters.

Key Features at a Glance

• 1,200 W power output, 230 V, single-speed
• Load speed: 670 RPM
• Mixing volume up to 50 liters
• For paddles up to 140 mm diameter
• Integrated mixing time display (timer)
• HEXAFIX PRO quick-change coupling for tool-less paddle changes
• Rubber bumpers on all four corners
• Made in Germany

Technical Data for the XQ2

Scope of Delivery

• Collomix XQ2 Mixer
• WK 140 HF mixing paddle
• Operating manual