Everclear 2-component colour adhesive, cream Art. 12967
Everclear 2-component colour adhesive, cream no. 12967
Everclear 2-Component Colour Adhesive is used to permanently bond large-area, light-coloured ceramics to exterior and interior surfaces. This colour adhesive can be used for vertical bonding of visible joints.
Properties:
- outstanding adhesion, almost non-yellowing
- weather-resistant
- wide adhesive gap possible
You can choose between five different colours for colour-matched bonding:
- Everclear colour adhesive, white Art. 12965
- Everclear colour adhesive, white Art. 12966
- Everclear colour adhesive, cream Art. 12967
- Everclear colour adhesive, beige Art. 12968
- Everclear colour adhesive, grey Art. 12969
The Everclear 2-component colour adhesive can be easily applied using the 2-component joint gun Art. 12970 or the 2-component skeleton gun Art. 12987. In addition, we recommend the mixing nozzle, 12 pieces Art. 12971, for use with Everclear colour adhesive.
Everclear 2-component colour adhesive - easy application in just a few steps:
Ensure in advance that the surface is clean, dust-free, completely dry and roughened.
Remove the cartridge cap and insert the cartridge into the 2-component joint gun. Press the handle of the joint gun until the material emerges from both openings. Unscrew the mixing nozzle, do not use the first 10 cm of the material in the mixing nozzle.
At 20° C, the mixture can be used for approx. 20 minutes. The maximum strength is reached after approx. 48 hours at 20° C. The mixture can be mixed for approx. 20 minutes. You can accelerate the curing time by using heat.
Do you have any questions or would you like personal advice from a Karl Dahm employee?
We are available for you from Monday to Thursday from 7:00 - 17:00 and on Fridays from 7:00 - 16:00 h.
E-Mail: info@karldahm.com
KARL DAHM - your partner for professional tools!
Everclear 2-component colour adhesive, cream no. 12967
Everclear 2-Component Colour Adhesive is used to permanently bond large-area, light-coloured ceramics to exterior and interior surfaces. This colour adhesive can be used for vertical bonding of visible joints.
Properties:
- outstanding adhesion, almost non-yellowing
- weather-resistant
- wide adhesive gap possible
You can choose between five different colours for colour-matched bonding:
- Everclear colour adhesive, white Art. 12965
- Everclear colour adhesive, white Art. 12966
- Everclear colour adhesive, cream Art. 12967
- Everclear colour adhesive, beige Art. 12968
- Everclear colour adhesive, grey Art. 12969
The Everclear 2-component colour adhesive can be easily applied using the 2-component joint gun Art. 12970 or the 2-component skeleton gun Art. 12987. In addition, we recommend the mixing nozzle, 12 pieces Art. 12971, for use with Everclear colour adhesive.
Everclear 2-component colour adhesive - easy application in just a few steps:
Ensure in advance that the surface is clean, dust-free, completely dry and roughened.
Remove the cartridge cap and insert the cartridge into the 2-component joint gun. Press the handle of the joint gun until the material emerges from both openings. Unscrew the mixing nozzle, do not use the first 10 cm of the material in the mixing nozzle.
At 20° C, the mixture can be used for approx. 20 minutes. The maximum strength is reached after approx. 48 hours at 20° C. The mixture can be mixed for approx. 20 minutes. You can accelerate the curing time by using heat.
Do you have any questions or would you like personal advice from a Karl Dahm employee?
We are available for you from Monday to Thursday from 7:00 - 17:00 and on Fridays from 7:00 - 16:00 h.
E-Mail: info@karldahm.com
KARL DAHM - your partner for professional tools!
Customers who bought this product also bought these items:
