Adapter foam brings construction-foam quality to the job site without extra equipment. The OTTOPUR OP 930 is a one-component PU foam that applies without a special dispensing gun – ideal for anyone who wants to insulate quickly and easily. This adapter foam offers excellent thermal insulation and reliable sound insulation.
This adapter foam is ideal for installing and insulating window and door frames made of wood, steel or PVC set into masonry. It also delivers reliable results on interior partition walls and windowsills, with no equipment investment needed.
This adapter foam achieves an insulation value of 0.035 W/mK per DIN 52612 and 58 dB sound insulation per EN ISO 717-1. Yield is approximately 22 litres per 500 ml can. The foam is cuttable after about 30 minutes and fully load-bearing after 3 to 5 hours.
This adapter foam holds a general building authority test certificate as a normally flammable material (class E per DIN EN 13501-1) and is rated EMICODE® EC1 PLUS for very low emissions. It also meets French VOC emission class A+.
This adapter foam is designed to apply without a special dispensing gun, making it especially practical for spontaneous jobs.
| Property | Wert |
| Base | 1K PU adapter foam |
| Sound insulation | 58 dB per EN ISO 717-1 |
| Insulation value | 0.035 W/mK per DIN 52612 |
| Yield | approx. 22 litres per 500 ml can |
| Cuttable after | approx. 30 minutes |
| Load-bearing after | approx. 3 to 5 hours |
| Fire safety | class E per DIN EN 13501-1 |
| Emissions | EMICODE® EC1 PLUS, French VOC class A+ |
| Colour | beige |
| Packaging | 500 ml aerosol can |
No, the adapter foam OTTOPUR OP 930 applies without a special dispensing gun.
This adapter foam is suitable for installing and insulating window and door frames, interior partition walls and windowsills, as well as filling cavities.
The yield is approximately 22 litres per 500 ml can.
The foam is cuttable after about 30 minutes and fully load-bearing after 3 to 5 hours.