Diamond core bit GOLD M14 | Ø 120 mm | no. 50416
Diamond core bit GOLD with M14 holder | Diameter 120 mm
- For the angle grinder (M14 internal thread)
- Fast drilling into all hard materials such as porcelain stoneware, tiles, natural stone
- Up to 30 mm drilling depth
- Speed: 10.000 - 13.000 rpm.
- Highest quality
Application of the drill bit:
- Screw the drill bit onto the spindle (here: M14 thread). In order to facilitate the removal of the drill bit later, you should leave the inner flange on the spindle.
- Place the drill bit at an angle to the material. Move the drill bit evenly and without pressure in gentle circular movements. If sparks are visible, the pressure must be reduced.
- Avoid overheating. If the material is harder, the pressure must be lower and longer cooling pauses must be taken.
Select the appropriate diameter:
no. 50394 Diamond drill bit GOLD Ø 6 mm
no. 50395 Diamond drill bit GOLD Ø 8 mm
no. 50396 Diamond drill bit GOLD Ø 10 mm
no. 50397 Diamond drill bit GOLD Ø 12 mm
no. 50398 Diamond drill bit GOLD Ø 14 mm
no. 50399 Diamond drill bit GOLD Ø 18 mm
no. 50400 Diamond drill bit GOLD Ø 20 mm
no. 50406 Diamond drill bit GOLD Ø 25 mm
no. 50407 Diamond drill bit GOLD Ø 32 mm
no. 50401 Diamond drill bit GOLD Ø 35 mm
no. 50402 Diamond drill bit GOLD Ø 38 mm
no. 50409 Diamond drill bit GOLD Ø 40 mm
no. 50403 Diamond drill bit GOLD Ø 43 mm
no. 50411 Diamond drill bit GOLD Ø 45 mm
no. 50404 Diamond drill bit GOLD Ø 50 mm
no. 50412 Diamond drill bit GOLD Ø 55 mm
no. 50240 Diamond drill bit GOLD Ø 60 mm
no. 50241 Diamond drill bit GOLD Ø 65 mm
no. 50405 Diamond drill bit GOLD Ø 68 mm
no. 50413 Diamond drill bit GOLD Ø 75 mm
no. 50414 Diamond drill bit GOLD Ø 82 mm
no. 50242 Diamond drill bit GOLD Ø 100 mm
no. 50415 Diamond drill bit GOLD Ø 110 mm
no. 50416 Diamond drill bit GOLD Ø 120 mm
Diamond core bit GOLD with M14 holder | Diameter 120 mm
- For the angle grinder (M14 internal thread)
- Fast drilling into all hard materials such as porcelain stoneware, tiles, natural stone
- Up to 30 mm drilling depth
- Speed: 10.000 - 13.000 rpm.
- Highest quality
Application of the drill bit:
- Screw the drill bit onto the spindle (here: M14 thread). In order to facilitate the removal of the drill bit later, you should leave the inner flange on the spindle.
- Place the drill bit at an angle to the material. Move the drill bit evenly and without pressure in gentle circular movements. If sparks are visible, the pressure must be reduced.
- Avoid overheating. If the material is harder, the pressure must be lower and longer cooling pauses must be taken.
Select the appropriate diameter:
no. 50394 Diamond drill bit GOLD Ø 6 mm
no. 50395 Diamond drill bit GOLD Ø 8 mm
no. 50396 Diamond drill bit GOLD Ø 10 mm
no. 50397 Diamond drill bit GOLD Ø 12 mm
no. 50398 Diamond drill bit GOLD Ø 14 mm
no. 50399 Diamond drill bit GOLD Ø 18 mm
no. 50400 Diamond drill bit GOLD Ø 20 mm
no. 50406 Diamond drill bit GOLD Ø 25 mm
no. 50407 Diamond drill bit GOLD Ø 32 mm
no. 50401 Diamond drill bit GOLD Ø 35 mm
no. 50402 Diamond drill bit GOLD Ø 38 mm
no. 50409 Diamond drill bit GOLD Ø 40 mm
no. 50403 Diamond drill bit GOLD Ø 43 mm
no. 50411 Diamond drill bit GOLD Ø 45 mm
no. 50404 Diamond drill bit GOLD Ø 50 mm
no. 50412 Diamond drill bit GOLD Ø 55 mm
no. 50240 Diamond drill bit GOLD Ø 60 mm
no. 50241 Diamond drill bit GOLD Ø 65 mm
no. 50405 Diamond drill bit GOLD Ø 68 mm
no. 50413 Diamond drill bit GOLD Ø 75 mm
no. 50414 Diamond drill bit GOLD Ø 82 mm
no. 50242 Diamond drill bit GOLD Ø 100 mm
no. 50415 Diamond drill bit GOLD Ø 110 mm
no. 50416 Diamond drill bit GOLD Ø 120 mm
