OTTOPUR OP 915 Dispensing Foam 500 ml Can, Art. 13181

OTTOPUR OP 915 dispensing foam – precision for narrow joints

Reliable dispensing foam, even in the tightest spaces – that's the OTTOPUR OP 915. This dispensing foam was developed for applications that demand precision, offering excellent sound and thermal insulation and particular suitability for narrow joints often found in older-building renovation. Application of this dispensing foam requires a matching OTTO dispensing gun.

Dispensing foam for older-building renovation and precise window installation

This dispensing foam is ideal for installing and insulating window and door frames made of wood, steel or PVC, as well as interior partition walls and windowsills.

• Installing and insulating window and door frames made of wood, steel or PVC set into masonry
• Installing and insulating interior partition walls, windowsills etc.
• Filling cavities of all kinds
• Especially suited to narrow joints, e.g. in older-building renovation
• Joining well and shaft rings in manhole covers and septic systems
• Bonding polystyrene rigid foam boards for perimeter insulation per DIN 4108-2

Dispensing foam properties built for professional use

This dispensing foam achieves an insulation value of 0.038 W/mK per DIN 52612 and 60 dB sound insulation per EN ISO 717-1. Yield is approximately 36 litres per 500 ml can. The foam is cuttable after about 35 minutes and fully load-bearing after around 24 hours.

• Excellent sound and thermal insulation
• 60 dB sound insulation per EN ISO 717-1
• 0.038 W/mK insulation value per DIN 52612
• Yield approx. 36 litres per 500 ml can
• Cuttable after approx. 35 minutes, load-bearing after approx. 24 hours

Standards and certifications for this dispensing foam

This dispensing foam holds a general building authority test certificate as a normally flammable material (B2 per DIN 4102-1) and is rated EMICODE® EC1 PLUS for very low emissions. It also meets French VOC emission class A+.

Correct application of this dispensing foam

This dispensing foam is applied using an OTTO dispensing gun, allowing precise dosing even in the narrowest joints.