Dry drill diamond Ø 40 mm MATRIXTEC, Art. 50817
NEW: Dry drill bit diamond 40 mm - discover the new MATRIXTEC drill bits from KARL DAHM
The latest generation of MATRIXTEC diamond core bits brings a breakthrough in the world of drilling. With a diameter of 40 mm, the dry core bit is an excellent solution for precise drilling in the hardest materials. These drill bits enable fast and precise drilling without damage to the drill bit and with minimal effort.
The diamond coating is innovative and provides excellent cooling during the drilling process, which extends the life of the drill bits. The diamonds are specifically arranged in the matrix and coated with a wear-resistant coating, which ensures greater longevity and cutting ability compared to conventional diamond drills. This results in a very long service life and consistent cutting performance.
The drill bits are equipped with an M14 mount, which allows for easy installation on almost any angle grinder with an M14 thread.
The application is simple:
Mount the diamond core bit on the angle grinder (M14 mount), start the angle grinder and insert the core bit into the material with tumbling movements. Do not lay the drill bit flat on the material to ensure sufficient cooling of the diamonds during drilling and to avoid damaging the drill bit. Work your way into the material until the hole is complete.
The new matrix coating provides better cooling of the diamonds and consistent running, which means the drill bit stays ready to use for longer periods of time and you save money on every hole you drill.
MATRIXTEC diamond drill bits offer numerous advantages, such as easy and quick mounting on almost any angle grinder thanks to the M14 mount, suitability for tiles, porcelain stoneware and natural stone, consistently high cutting performance and service life thanks to the new type of matrix coating, as well as excellent cooling and homogeneous running performance during drilling. There are many common diameters of these drill bits to choose from.
NEW: Dry drill bit diamond 40 mm - discover the new MATRIXTEC drill bits from KARL DAHM
The latest generation of MATRIXTEC diamond core bits brings a breakthrough in the world of drilling. With a diameter of 40 mm, the dry core bit is an excellent solution for precise drilling in the hardest materials. These drill bits enable fast and precise drilling without damage to the drill bit and with minimal effort.
The diamond coating is innovative and provides excellent cooling during the drilling process, which extends the life of the drill bits. The diamonds are specifically arranged in the matrix and coated with a wear-resistant coating, which ensures greater longevity and cutting ability compared to conventional diamond drills. This results in a very long service life and consistent cutting performance.
The drill bits are equipped with an M14 mount, which allows for easy installation on almost any angle grinder with an M14 thread.
The application is simple:
Mount the diamond core bit on the angle grinder (M14 mount), start the angle grinder and insert the core bit into the material with tumbling movements. Do not lay the drill bit flat on the material to ensure sufficient cooling of the diamonds during drilling and to avoid damaging the drill bit. Work your way into the material until the hole is complete.
The new matrix coating provides better cooling of the diamonds and consistent running, which means the drill bit stays ready to use for longer periods of time and you save money on every hole you drill.
MATRIXTEC diamond drill bits offer numerous advantages, such as easy and quick mounting on almost any angle grinder thanks to the M14 mount, suitability for tiles, porcelain stoneware and natural stone, consistently high cutting performance and service life thanks to the new type of matrix coating, as well as excellent cooling and homogeneous running performance during drilling. There are many common diameters of these drill bits to choose from.
