Diamond core bit MATRIXTEC Ø 30 mm with matrix coating, Art. 50813
Diamond core bit MATRIXTEC Ø 30 mm with M14 adapter, Art. 50813
What makes the new MATRIXTEC diamond core bits so special?
The new MATRIXTEC diamond core bit is unique due to its innovative diamond coating. The diamond coating is arranged in a controlled matrix, which ensures improved air circulation during the drilling process. This significantly increases the service life of the core bit, saving time and money. In addition, the MATRIXTEC diamond core bit delivers perfect drilling results every time.
How do I use the MATIXTEC diamond core bits?
To use MATRIXTEC's diamond dry core bits, you need to attach them to an angle grinder using the M14 mount and start the machine. Place the diamond core bit on the material at an angle and move it in pivoting movements until it has drilled completely through the material. It is important to use as little force as possible while drilling and let the diamond core bit do the work. The pivoting motions provide optimum cooling of the diamond coating.
Note: Keep in mind, however, that you should not place the drill bit flat on the material, as this can lead to premature wear and unwanted fraying.
All advantages and functions at a glance:
- Best cooling of the diamond coating due to novel MATRIXTEC arrangement.
- Consistent running and high cutting performance of the core bit
- Extended tool life
- Available in many different diameters
- Suitable for tiles, porcelain stoneware, natural stone and ceramics
- For materials up to 30 mm thick
- With M14 attachment for all common angle grinders
Diamond core bit MATRIXTEC Ø 30 mm with M14 adapter, Art. 50813
What makes the new MATRIXTEC diamond core bits so special?
The new MATRIXTEC diamond core bit is unique due to its innovative diamond coating. The diamond coating is arranged in a controlled matrix, which ensures improved air circulation during the drilling process. This significantly increases the service life of the core bit, saving time and money. In addition, the MATRIXTEC diamond core bit delivers perfect drilling results every time.
How do I use the MATIXTEC diamond core bits?
To use MATRIXTEC's diamond dry core bits, you need to attach them to an angle grinder using the M14 mount and start the machine. Place the diamond core bit on the material at an angle and move it in pivoting movements until it has drilled completely through the material. It is important to use as little force as possible while drilling and let the diamond core bit do the work. The pivoting motions provide optimum cooling of the diamond coating.
Note: Keep in mind, however, that you should not place the drill bit flat on the material, as this can lead to premature wear and unwanted fraying.
All advantages and functions at a glance:
- Best cooling of the diamond coating due to novel MATRIXTEC arrangement.
- Consistent running and high cutting performance of the core bit
- Extended tool life
- Available in many different diameters
- Suitable for tiles, porcelain stoneware, natural stone and ceramics
- For materials up to 30 mm thick
- With M14 attachment for all common angle grinders
