OTTOSEAL® S 100 Silicone Bahama Beige Glossy (C10), Art. No. 13123

OTTOSEAL® S 100 Silicone Bahama Beige Glossy (C10) – Item No. 13123

The OTTOSEAL® S 100 silicone in the Bahama Beige glossy colour variant (C10), Item No. 13123, is a high-quality, elastic sealant based on acetate, specially developed for demanding sanitary applications. This premium product features excellent adhesion on numerous substrates and provides reliable protection against penetrating moisture and mould growth. The durable silicone compound is resistant to ageing, UV radiation, and extreme temperature fluctuations, making it particularly long-lasting.

Applications and Features

OTTOSEAL® S 100 Bahama Beige Glossy is ideally suited for elastic sealing of joints and connections in bathrooms, showers, WC areas, as well as around sinks and bathtubs. Thanks to its smooth, creamy consistency, the silicone is easy to apply, spreads evenly, and allows for a clean, aesthetic joint appearance. Due to its high elasticity, the material flexibly adapts to movements in the joints, preventing cracking and leaks.

The colour "Bahama Beige Glossy" gives sanitary installations a warm, modern, and elegant look that harmonises well with many colour schemes and enhances the room’s aesthetics.

Product Benefits

• Excellent mould resistance due to fungicidal agents – ideal for wet rooms
• Durable resistance to UV radiation, weathering, and ageing
• Wide temperature range from -40 °C to +180 °C for versatile applications
• High elongation capacity of up to 50% ensures flexible joint design without cracking
• Excellent adhesion to glazed tiles, ceramics, enamel, glass, and many plastics
• Meets the requirements of EN 15651 and is EMICODE® EC1-Plus certified – low-emission and environmentally friendly

Technical Data

• Skin formation time: approx. 10 minutes at 23 °C / 50% relative humidity
• Complete curing: approx. 2–3 mm in 24 hours
• Application temperature: +5 °C to +35 °C
• Shore A hardness: approx. 20 – soft, elastic surface
• Standards and certificates: EN 15651, EMICODE® EC1-Plus, IVD-certified

Application Instructions

For optimal results, substrates must be clean, dry, free of grease, and free of loose particles. On particularly smooth or non-absorbent materials, pre-treatment with a suitable primer is recommended to improve adhesion. The silicone should be applied using an appropriate cartridge gun. Afterwards, the fresh joint can be shaped with a suitable smoothing agent to achieve a clean and even surface. At cooler temperatures (below +10 °C), it is advisable to bring the cartridge to room temperature before use to improve flowability.

FAQ about OTTOSEAL® S 100 Silicone Bahama Beige Glossy

What makes the colour "Bahama Beige Glossy (C10)" special?

The warm yet subtle beige tone with a glossy finish blends harmoniously into many modern bathroom and sanitary designs, providing an elegant, contemporary appearance.

What applications is this silicone particularly suited for?

OTTOSEAL® S 100 is excellent for sealing joints and connections in wet rooms such as bathrooms, showers, WC areas, and kitchens.

Is the silicone resistant to mould and fungi?

Yes, thanks to integrated fungicidal agents, the silicone offers long-term protection against mould growth, making it ideal for use in wet rooms.

Can I use the silicone on natural stone?

Care should be taken with sensitive natural stones such as marble or slate, as the product can cause discolouration at the edges. For such applications, we recommend specialised natural stone silicones.

How long does complete curing take?

Skin formation occurs after approximately 10 minutes, with complete curing of 2–3 mm joint depth after about 24 hours.

How can I prevent mould formation in joints in the long term?

Besides the fungicidal effect, regular cleaning of joints and good room ventilation are important to prevent mould formation sustainably.