OTTOSEAL® S 100 sanitary silicone grey glossy (C02), art.-no. 13120

OTTOSEAL® S 100 Sanitary Silicone Grey Glossy (C02) – Item No. 13120

The OTTOSEAL® S 100 Sanitary Silicone in Grey Glossy (C02), Item No. 13120, is a highly flexible sealant, ideal for use in wet rooms and for the reliable sealing of sanitary installations. It features excellent mould resistance and a durable, visually appealing joint surface.

Applications and Product Features

The single-component OTTOSEAL® S 100 Acetate Silicone is particularly suitable for flexible joint sealing in bathrooms, showers, and around sanitary fittings. Its pasty texture allows easy application and smooth, long-lasting seals.

Product Benefits at a Glance

The silicone offers effective protection against mould and bacteria, is UV-resistant, and withstands temperature fluctuations as well as weathering. With an elongation capacity of up to 50%, the joint remains permanently elastic.

Technical Specifications

• Skin formation: approx. 10 minutes (23 °C / 50 % RH)
• Curing (24 hours): 2–3 mm
• Processing temperature: +5 °C to +35 °C
• Consistency: pasty, non-sagging
• Shore A hardness: approx. 20
• Temperature resistance: -40 °C to +180 °C
• Complies with standards: EN 15651, EMICODE® EC1-Plus, IVD seal

Processing Instructions

Surfaces must be clean, dry, and free of grease before application. On smooth surfaces, a primer may be used for improved adhesion. After application, finishing with a smoothing agent or suitable tool is recommended for a perfect joint appearance.

Available Colours

The silicone is available in several colours, including Grey Glossy (C02), which is especially suitable for tiles with a modern sanitary look.

• Silver Grey Glossy (C94) – Item No. 13116
• White Glossy (C01) – Item No. 13115
• Manhattan Glossy (C43) – Item No. 13117
• Sanitary Grey Glossy (C18) – Item No. 13118
• Cement Grey Glossy (C706) – Item No. 13119
• Grey Glossy (C02) – Item No. 13120
• Anthracite Glossy (C67) – Item No. 13121
• Pergamon Glossy (C84) – Item No. 13122
• Bahama Beige Glossy (C64) – Item No. 13123
• Caramel Glossy (C09) – Item No. 13124

FAQ about OTTOSEAL® S 100 Sanitary Silicone Grey Glossy (C02)

What distinguishes the colour "Grey Glossy (C02)" from other grey tones?

Grey Glossy (C02) is a neutral, elegant shade ideal for sanitary applications, creating a modern, simple joint appearance.

Is the silicone suitable for wet areas?

Yes, the product is specifically developed for wet rooms and provides long-lasting protection against mould formation due to its fungicidal ingredients.

Can I use the silicone on natural stone?

For sensitive natural stones such as marble or slate, the use of this product is not recommended to avoid edge zone damage.

How should I store and apply the product in cool temperatures?

Application is possible from +5 °C. For optimal results, the cartridge should be warmed to room temperature before use.

When is the joint load-bearing?

Skin formation takes about 10 minutes, full curing takes around 24 hours (2–3 mm depth). Only then is the joint mechanically and water-resistant.

How do I ensure a permanently mould-resistant joint?

Thanks to the fungicidal effect, protection is long-lasting. Regular cleaning and good ventilation help to prevent mould formation.