OTTOSEAL® S 100 silicone, grey-red (C1010), art.-no. 13144

OTTOSEAL® S 100 Silicone grey-red (C1010) – Art.-No. 1344

The OTTOSEAL® S 100 silicone in the color variant grey-red (C1010), Art.-No. 13144, is a high-quality, elastic sealant based on acetate, specially developed for demanding sanitary applications. This premium product impresses with excellent adhesion to many substrates and provides reliable protection against moisture and mold. The durable silicone compound is resistant to aging, UV radiation and extreme temperature fluctuations, ensuring long-lasting performance.

Applications and properties

OTTOSEAL® S 100 black glossy is ideal for the elastic sealing of joints and connections in bathrooms, showers, toilet areas, as well as washbasins and bathtubs. The smooth, creamy consistency enables easy application and a clean, aesthetic joint finish. Thanks to its high elasticity, the material flexibly adapts to movement and prevents cracks and leaks.

The color “black glossy” gives sanitary installations a warm, elegant appearance that blends harmoniously into many color concepts and enhances the aesthetics of the room.

Product advantages

• Excellent mold resistance thanks to fungicidal agents – ideal for wet rooms
• Permanent resistance to UV radiation, weathering and aging
• Temperature range from -40 °C to +180 °C for versatile applications
• High elongation of up to 50 % for flexible joint design without cracks
• Very good adhesion to glazed tiles, ceramics, enamel, glass and plastics
• Complies with EN 15651 and is EMICODE® EC1-Plus certified – low emissions and environmentally friendly

Technical data

• Skin formation time: approx. 10 minutes at 23 °C / 50 % humidity
• Complete curing: approx. 2–3 mm in 24 hours
• Application temperature: +5 °C to +35 °C
• Shore A hardness: approx. 20 – soft and elastic
• Standards: EN 15651, EMICODE® EC1-Plus, IVD certified

Application notes

Substrates must be clean, dry and free of grease. On smooth or slightly absorbent surfaces, a primer is recommended for better adhesion. The silicone is applied with a cartridge gun and the joint is shaped with a smoothing agent. At temperatures below +10 °C, the cartridge should be brought to room temperature before use.

FAQ about OTTOSEAL® S 100 Silicone grey-red 

What characterizes the color “grey-red (1010)”?

The grey-red creates an elegant, harmonious look in sanitary areas.

What applications is the silicone suitable for?

Ideal for sealing joints and connections in wet rooms such as bathrooms, showers, toilet facilities and kitchens.

Is the silicone mold-resistant?

Yes, fungicidal agents provide long-term protection against mold growth.

Can the silicone be used on natural stone?

Caution is advised with sensitive stones such as marble, as discoloration may occur. We recommend special products for natural stone.

How long does curing take?

Skin formation after approx. 10 minutes, complete curing of 2–3 mm after approx. 24 hours.

How can I prevent mold in the long term?

Regular cleaning of the joints and good ventilation help to prevent mold growth.