Building lift Levelmac Mini Flipper No. 40041
New at KARL DAHM - Tools for occupational safety and health.
Never again drag heavy tiles or materials through narrow staircases. The new Levelmac® construction lift "Mini Flipper" brings your work materials directly to your window. Save your back and your trainees!
The advantages of the Levelmac® Construction Lift "Mini Flipper" at a glance:
- No more lugging heavy work materials
- More time and energy for your actual project - you work more economically and faster
- Can be used almost everywhere on windows, balconies and scaffolding
- Little space required, compact to fold up
- Can be set up on site without tools and in a short time
An investment that makes work much easier and pays off after a short time!
Think of your health!
Nowadays, tilers in particular are faced with ever greater challenges - quite literally. Because the tile formats are getting bigger and bigger! At the latest when you have to lug formats from 60 x 60 cm up to the first or second floor, you have already used up a lot of energy just getting the working materials ready before the actual work can start. Bags of glue and toolboxes also weigh quite a bit. Add to that the travel time from the car to the first or second floor, along with the small amount of materials a single person can carry, and you'd actually want to pack up and go home right away.
Levelmac® "Mini-Flipper" Construction Lift
The Construction Lift "Mini-Flipper" is designed to do just such work for you - saving your energy and time. The Levelmac® Construction Lift is ready to use in just 5 minutes, you don't need any tools to set up the "Mini Flipper". A lift to the 7th floor takes only about 2 minutes.
How does the "Mini Flipper" construction lift work?
The transported goods are pulled by two traction ropes, these prevent parts from twisting while being pulled up and thus damaging the house wall. Due to the flipping mechanism, the transported materials are tipped over the edge of the window into the room and can be conveniently removed.
Thanks to the special design, a positive effect for the stability is created on the back side by the own weight of the winches and the longer lever. Two ceiling supports additionally provide the necessary safety. An aluminum tub is additionally available for the Levelmac® "Mini Flipper" construction lift, which is perfect for transporting tiles and cement and adhesive bags.
You can transport building material up to a height of 25 m. The material is pulled up the wall of the house, once it reaches the top, it folds into the horizontal position. For tiles, drywall panels, windows, etc. up to a max. size of 2500 x 1300 mm. The Levelmac® Baulift can also transport boxes up to a max. size of 1000 x 300 x 2000 mm.
Scope of delivery:
- Levelmac® "Mini Flipper"
- Winch jack
- Front legs
- Support widening 2 m for the Heek
- Support widening 2 m for extra wide lifting material
- 2 construction supports to fix the boom lift against avoidable tipping over
- 2 rope slings for lashing the lifting material (permissible load 350 kg each)
- Operating instructions of the tree lift
- Operating instructions of the cable winches
Technical data Levelmac® Construction Lift "Mini Flipper":
Main frame:
- Dimensions (L x W x H): 1450 x 650 x 150 mm
- Weight: 30 kg
Rear legs:
- Dimensions 770-1200 x 650 mm
- Weight 6 kg
Winch block:
- Dimensions: 1000 x 200 x 200 mm
- Weight: 30 kg
Widening bars, 2 pieces:
- Dimensions: 1500 mm
- Weight: 10 kg
Ceiling supports, 2 pieces:
- Dimensions: 950-1700 mm (Piher)
- weight: 4 kg
Braces, 2 pieces:
- Dimension: 1000 mm
- Weight: 5 kg
The total weight with accessories is 85 kg. The counterweight is not included
Other technical data:
- Power supply: 220 V
- Power: 2x 450 W
- Lifting / lowering speed: 10 - 12 m/min
- Max. Lifting height: 25 meters
- Max. Pull weight: 150 kg
- Counterweight at full load: 120 kg
- Rope length: 25 m (approx. 7th floor)
- Permissible outer dimensions of tiles, windows, panes, doors, slabs that may be lifted (H x W x D): 250 x 130 x 30 cm
- Height x width x depth: 1300 x 2500 x 300 mm
Easy transport and assembly:
The construction lift is designed to be extremely compact and folds up perfectly. It can be transported to the place of use with a hand truck. The delivery is without aluminum tray! This is available here!
Suitable accessories for the Levelmac® "Mini Flipper" Baulift
For transporting tiles, adhesive bags, cement bags and smaller tools, the aluminum tub for the "Mini-Flipper" Baulift is ideally suited.
Do you have any questions about our Levelmac® construction lift "Mini Flipper"? Call us or write to us. We are happy to advise you!
Tel.: 08667 878-0
E-Mail: info@dahm-werkzeuge.de
New at KARL DAHM - Tools for occupational safety and health.
Never again drag heavy tiles or materials through narrow staircases. The new Levelmac® construction lift "Mini Flipper" brings your work materials directly to your window. Save your back and your trainees!
The advantages of the Levelmac® Construction Lift "Mini Flipper" at a glance:
- No more lugging heavy work materials
- More time and energy for your actual project - you work more economically and faster
- Can be used almost everywhere on windows, balconies and scaffolding
- Little space required, compact to fold up
- Can be set up on site without tools and in a short time
An investment that makes work much easier and pays off after a short time!
Think of your health!
Nowadays, tilers in particular are faced with ever greater challenges - quite literally. Because the tile formats are getting bigger and bigger! At the latest when you have to lug formats from 60 x 60 cm up to the first or second floor, you have already used up a lot of energy just getting the working materials ready before the actual work can start. Bags of glue and toolboxes also weigh quite a bit. Add to that the travel time from the car to the first or second floor, along with the small amount of materials a single person can carry, and you'd actually want to pack up and go home right away.
Levelmac® "Mini-Flipper" Construction Lift
The Construction Lift "Mini-Flipper" is designed to do just such work for you - saving your energy and time. The Levelmac® Construction Lift is ready to use in just 5 minutes, you don't need any tools to set up the "Mini Flipper". A lift to the 7th floor takes only about 2 minutes.
How does the "Mini Flipper" construction lift work?
The transported goods are pulled by two traction ropes, these prevent parts from twisting while being pulled up and thus damaging the house wall. Due to the flipping mechanism, the transported materials are tipped over the edge of the window into the room and can be conveniently removed.
Thanks to the special design, a positive effect for the stability is created on the back side by the own weight of the winches and the longer lever. Two ceiling supports additionally provide the necessary safety. An aluminum tub is additionally available for the Levelmac® "Mini Flipper" construction lift, which is perfect for transporting tiles and cement and adhesive bags.
You can transport building material up to a height of 25 m. The material is pulled up the wall of the house, once it reaches the top, it folds into the horizontal position. For tiles, drywall panels, windows, etc. up to a max. size of 2500 x 1300 mm. The Levelmac® Baulift can also transport boxes up to a max. size of 1000 x 300 x 2000 mm.
Scope of delivery:
- Levelmac® "Mini Flipper"
- Winch jack
- Front legs
- Support widening 2 m for the Heek
- Support widening 2 m for extra wide lifting material
- 2 construction supports to fix the boom lift against avoidable tipping over
- 2 rope slings for lashing the lifting material (permissible load 350 kg each)
- Operating instructions of the tree lift
- Operating instructions of the cable winches
Technical data Levelmac® Construction Lift "Mini Flipper":
Main frame:
- Dimensions (L x W x H): 1450 x 650 x 150 mm
- Weight: 30 kg
Rear legs:
- Dimensions 770-1200 x 650 mm
- Weight 6 kg
Winch block:
- Dimensions: 1000 x 200 x 200 mm
- Weight: 30 kg
Widening bars, 2 pieces:
- Dimensions: 1500 mm
- Weight: 10 kg
Ceiling supports, 2 pieces:
- Dimensions: 950-1700 mm (Piher)
- weight: 4 kg
Braces, 2 pieces:
- Dimension: 1000 mm
- Weight: 5 kg
The total weight with accessories is 85 kg. The counterweight is not included
Other technical data:
- Power supply: 220 V
- Power: 2x 450 W
- Lifting / lowering speed: 10 - 12 m/min
- Max. Lifting height: 25 meters
- Max. Pull weight: 150 kg
- Counterweight at full load: 120 kg
- Rope length: 25 m (approx. 7th floor)
- Permissible outer dimensions of tiles, windows, panes, doors, slabs that may be lifted (H x W x D): 250 x 130 x 30 cm
- Height x width x depth: 1300 x 2500 x 300 mm
Easy transport and assembly:
The construction lift is designed to be extremely compact and folds up perfectly. It can be transported to the place of use with a hand truck. The delivery is without aluminum tray! This is available here!
Suitable accessories for the Levelmac® "Mini Flipper" Baulift
For transporting tiles, adhesive bags, cement bags and smaller tools, the aluminum tub for the "Mini-Flipper" Baulift is ideally suited.
Do you have any questions about our Levelmac® construction lift "Mini Flipper"? Call us or write to us. We are happy to advise you!
Tel.: 08667 878-0
E-Mail: info@dahm-werkzeuge.de
Related Products
Customers who bought this product also bought these items:
