Mobile tile drilling system KDB-200 with pump-suction cup | no. 40105
Drill stand KDB-200 with pump suction lifter for flexible mounting on large tiles | Drill independent of format | Art. 40105
KARL DAHM's new drill stand with pump-suction lifter enables you to drill holes in tiles of any size. The drill stand can be placed freely and flexibly on any tile. Thanks to the integrated pump-suction lifter, the drill stand is firmly fixed and cannot slip.
Advantages:
- Format-independent drill holes in XXL tiles are possible at any time
- The drill rig is mobile and flexible
- Continuous water cooling by the mobile water system (pressurized water tank incl. personal protection switch) - the diamond core bits are always optimally cooled
- Secure fixation on the tile thanks to the strong Karl Dahm Pump suction pad (holds securely and reliably even on rough surfaces)
- drilling range 6 to 120 mm possible
Clean and precise drilling in tiles and slabs
With the KDB-200 drill stand with pump-suction lifter you achieve the best drilling results - even in the hardest materials. Thanks to the mobile water cooling system the drill bits are continuously cooled with water. This makes the drill stand perfect for series drilling and ensures a long service life of the drill bits. The integrated personnel safety switch ensures a safe working environment when working with water.
Scope of delivery drill stand KDB-200 with pump suction lifter:
- 1 drill stand
- 1 pump suction lift
- 1 pressurized water tank with hose
- 1 personal protection switch
Technical data:
- Power consumption: 1150 W
- Nominal voltage: 230 V
- Degree of protection: IP 20
- Weight: 20,9 kg
- Nominal speed: 250 - 1000 rpm
- drilling range: 6 - 120 mm
- tool holder: R 1/2 " inside
- Protection class: I
We recommend the following diamond drill bits for the KDB-200 drill stand:
- High-performance diamond core bits from KARL DAHM
- Faster drilling with less material chipping thanks to high-quality diamond segments
- Maximum drilling depth 60 mm
- Connection: 1/2" thread for flushing socket
- Very long service life and best results
- In many different diameters from 18 - 130 mm
>> Also available in practical sets with the most common diameters
(Art. 50190 Drill bit set incl. diamond sharpening stone)
>> Here you can find all KARL DAHM high performance drill bits
Further accessories for the KARL DAHM drill stand:
- Quick change adapter Art. 11456: for faster changing of the diamond core bits
- Diamond Sharpening Stone Art. 20050: makes blunt diamond core bits and diamond cutting discs for wet cutting sharp and razor sharp again - the tool life is significantly increased once again (ATTENTION: Only for wet core bits and wet cutting discs. Diamond sharpening stone always use dry only)
The drill stand KDB-200 is also available with the new battery vacuum suction lifter (Art. 40106)
Drill stand KDB-200 with pump suction lifter for flexible mounting on large tiles | Drill independent of format | Art. 40105
KARL DAHM's new drill stand with pump-suction lifter enables you to drill holes in tiles of any size. The drill stand can be placed freely and flexibly on any tile. Thanks to the integrated pump-suction lifter, the drill stand is firmly fixed and cannot slip.
Advantages:
- Format-independent drill holes in XXL tiles are possible at any time
- The drill rig is mobile and flexible
- Continuous water cooling by the mobile water system (pressurized water tank incl. personal protection switch) - the diamond core bits are always optimally cooled
- Secure fixation on the tile thanks to the strong Karl Dahm Pump suction pad (holds securely and reliably even on rough surfaces)
- drilling range 6 to 120 mm possible
Clean and precise drilling in tiles and slabs
With the KDB-200 drill stand with pump-suction lifter you achieve the best drilling results - even in the hardest materials. Thanks to the mobile water cooling system the drill bits are continuously cooled with water. This makes the drill stand perfect for series drilling and ensures a long service life of the drill bits. The integrated personnel safety switch ensures a safe working environment when working with water.
Scope of delivery drill stand KDB-200 with pump suction lifter:
- 1 drill stand
- 1 pump suction lift
- 1 pressurized water tank with hose
- 1 personal protection switch
Technical data:
- Power consumption: 1150 W
- Nominal voltage: 230 V
- Degree of protection: IP 20
- Weight: 20,9 kg
- Nominal speed: 250 - 1000 rpm
- drilling range: 6 - 120 mm
- tool holder: R 1/2 " inside
- Protection class: I
We recommend the following diamond drill bits for the KDB-200 drill stand:
- High-performance diamond core bits from KARL DAHM
- Faster drilling with less material chipping thanks to high-quality diamond segments
- Maximum drilling depth 60 mm
- Connection: 1/2" thread for flushing socket
- Very long service life and best results
- In many different diameters from 18 - 130 mm
>> Also available in practical sets with the most common diameters
(Art. 50190 Drill bit set incl. diamond sharpening stone)
>> Here you can find all KARL DAHM high performance drill bits
Further accessories for the KARL DAHM drill stand:
- Quick change adapter Art. 11456: for faster changing of the diamond core bits
- Diamond Sharpening Stone Art. 20050: makes blunt diamond core bits and diamond cutting discs for wet cutting sharp and razor sharp again - the tool life is significantly increased once again (ATTENTION: Only for wet core bits and wet cutting discs. Diamond sharpening stone always use dry only)
The drill stand KDB-200 is also available with the new battery vacuum suction lifter (Art. 40106)
Related Products
Customers who bought this product also bought these items:
